LAUNCH Creader V+ OBD2 Engine Code Reader EOBD OBDII Professional Car Diagnostic Tool LAUNCH Engine Scanner OBD Free Update

Top Reasons to Choose OBD2 Car Diagnostics Launch Creader V+:

【LAUNCH Scan Tool, Works Out of Box】-- Launch Creader V Plus obd2 scanner is "PLUG AND PLAY" without any Battery or Charger. Plug the diagnostic cable into the vehicle’s DLC socket to get the power directly.
【Warm Tips】-- If you do wanna to update the LAUNCH code reader, please note: The original website on the User's manual are improving, please update this code scanner car diagnostic tool on new website: eninfo dot x431 dot com: Products- Online products- "Creader V+" on page 4- Update Tools.
【After 1996 12V Vehicles, Covers More】-- This code reader for vehicles is designed to work with all STANDARD OBD II compliant after 1996 12v cars and light trucks /van for us-market with 16pin OBD port, including American, Asian, European vehicles. (If you are not sure, please let us know via Amazon message with vehicle’s brand, model and released time for confirmation.)
【Enhanced OBD2, Pass S-m-o-g Check】-- Featuring bi-directional special tests: EVAP, O2 sensor, I/M Readiness, MIL Status, VIN info, and on-board monitors testing for home and auto shop mechanics who need more functions apart from reading and erasing codes, few car code readers have all these features in this price range.
【3-Year QUALITY ASSURANCE, No Concerns】-- Creader V+ obdii car scanner comes with a user manual, a USB cable and English, French, Spanish, Russian, Polish, Turkish, Czech,Germany, Italian language supports. 3 Year QUALITY ASSURANCE, get it without concerns!

LAUNCH X431 OBD2 Scanner Creader V+ Supported Languages:

English, French, Spanish, Russian, Polish, Turkish, Czech,Germany, Italian

LAUNCH Creader V+ Full OBDII - 10 Modes of OBD2

Mode 01--- Request current powerstrain diagnostic data

Mode 02--- Request fre-eze frame information

Mode 03--- Request emissions-related diagnostic trouble codes

Mode 04--- Clear/reset emissions-related diagnostic information

Mode 05--- Request oxygen/o2 sensor monitoring test results

Mode 06--- Request on-board monitoring rest results for specific monitored systems: allow access to the test results for on-board diagnostic monitoring tests for specific components that are both continuously monitored(misfire monitoring) and non-continuously monitored systems.

Mode 07--- Request emission-related diagnostic trouble codes detected during current or last completed driving cycle

Mode 08--- Request control of on-board system, test or component

Mode 09--- Request vehicle information

Mode 0A--- Request emissions-related diagnostic trouble codes with permanent status after a clear/reset emission-related diagnostic information service.

Enhanced OBDII - On-Board Monitors Test

Launch V+ OBD2 scanner supports all OBDII monitors, including Misfire Monitors, Fuel System Monitors, Comprehensive Components Monitors, Catalyst Monitors, Heated Catalyst Monitors, Evaporative System Monitors, Secondary Air System Monitors, Air Conditioning Refrigerant Monitor, Oxygen Sensor Heater Monitor, Exhaust Gas Recirculation System Monitor.

Enhanced OBDII - O2 Sensor Test

Featuring bi-directional O2 sensor test. If your vehicle doesn't got any codes, V plus code reader can be used to test O2 sensor.

Enhanced OBDII- EVAP Test

Evaporative Emission System Leak P0456

The EVAP system is a closed system that captures fuel tank vapors and prevents them from escaping into the atmosphere. When your engine light comes on because of a weakness or failure in this system, you most likely won’t notice the car driving any differently.

Enhanced OBDII- Retrieve Vehicle Info

When your vehicle connected with Launch V plus, the code reader car diagnostic tool could read your Vehicle info, such as Vehicle Identification Number(VIN), Calibration Identifications(CID), Calibration Verification Numbers(CVN).

Built-in Code Definition

Enter the fault codes you got and enter them to get the code definitions and locate the bad parts of your vehicle.

2-PID Graphing Live Data

You can never ignore the power of a little device.The car diagnostic tool has 36 live data stream(varying on vehicle).

Fuel System 1&2 Status, Calculated Load Value, Engine Coolant Temperature, Short Term Fuel Trim-Bank 1, Long Term Fuel Trim-Bank 1, Intake Manifold Absolute Pressure, Engine RPM, Vehicle Speed, Ignition Timing Advance for #1 Cylinder, Intake Air temperature, Absolute Throttle Position, Oxygen Sensor Output Voltage(B1-S1), Short Term Fuel Trim(B1-S1), Oxygen Sensor Output Voltage(B1-S1), Short Term Fuel Trim(B1-S2), OBD Requirements, Time Since Engine Start, Distance Traveled While MIL is Activated, Commanded EGR, EGR Error, Commanded Evaporative Purge, Fuel Level Input, Number of warm-ups since DTCs cleared, Distance traveled since DTCs cleared, Barometric Pressure, Catalyst Temperature Bank1, Sensor 1, Control Module Voltage, Absolute Load Value, Fuel/Air Commanded Equivalence Ratio, Relative Throttle Position, Ambient air temperature, Absolute Throttle Position B...

How do i know OBD2 Scanner LAUNCH Creader V+ support my car or not ?

ISO 9141-2 (5 baud init, 10.4 Kbaud)
ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
ISO14230-4 KWP (fast init, 10.4 Kbaud)
ISO15765-4 CAN (11bit ID, 500 Kbaud)
ISO15765-4 CAN (29bit ID, 500 Kbaud)
ISO15765-4 CAN (11bit ID, 250 Kbaud)
ISO15765-4 CAN (29bit ID, 250 Kbaud)
SAE J1850 PWM(41.6Kbaud)
SAE J1850 VPW(10.4Kbaud)

European car:

Compatible with Standard OBD2 Cars from 2004 to Now:

for Alfa Romeo, for SAAB, for Acura, for Opel, for Audi, for Seat, for Bentley, for Skoda, for Daewoo, for Benz, for Daihatsu, for Land Rover, for BMW, for Vauxhall, for Volvo, for VW, for Ford, for Jaguar

France Car after 2006:

for Citroen，for Fiat，for Renault，for Peugeot

Not Support for Renault Clio 2/Megane/Dacia Logan,

American (USA) car:

Compatible with Standard OBD2 Cars from 2001 to Now:
for Chrysler, for Ford, for GM, for Jeep

Japanese car

Compatible with Standard OBD2 Cars from 2005 to Now:
for KIA, for Isuzu, for Honda , for Mitsubishi, for Hyundai, for Dacia, for Lexus, for Mazda, for Nissan, for Subaru, for Suzuki, for Toyota

Chinese car:

Compatible with Standard OBD2 Cars from 2008 to Now:
for BYD, for Chery, for Geely, for Great Wall, for Karry

NOTE:

Even though it compatible with most cars, but different regions support the vehicle OBD2 protocol at different times, or some car is special design, so it may not compatible with some cars which do not support OBD2 protocol. Especially Japanese and Korean car brand.And this device only have OBD2 Functions,don't have Special Functions,Like ABS Reset,Airbag Reset...

Please Leave us message in below format, we will reply you within 8 hours.

for example : xx, 2005, 2.0cc, Diesel

Warning:

Not Support Russian Cars VAZ,UAZ,LADA ; Not works with trucks

For Ssangyong Actyon , from 2009 to 2017 years.

For Ssangyong Korando , 2.0 TD Diesel , from 2013 to 2017 years.

For Ssangyong Kyron , 2.0 Diesel , from 2010 to 2017 years.

For Ssangyong Rexton , 2011 to 2017 years,

Not Support Opel Corsa c 2004 1.3 CDTI

Nor Support vw golf 4 2002

LAUNCH Creader V+ Lifetime Free Update:

Please download software from: http://eninfo.x431.com/prod_view.aspx?TypeId=68&Id=265&FId=t3:68:3