ELM327 V1.5 OBD2 Scanner PIC18F25K80 KONNWEI KW903 Bluetooth OBD 2 Diagnostic Tool ELM 327 Code Reader Auto Scanner

This is Bluetooth  version, support android/PC system,can't work with Iphone, ipad.BluetoothELM327 does support the diesel vehicles, but not for trucks, and this ELM327 is bluetooth version for android system cellphones/smart device.If you need the IOS version, please refer toICAR2 WIFI for IOS

The Switch is reset function, not for the power switch, pls kindly be aware of it.

ICar 2 Bluetooth Brief

The device is a small adapter that plugged into the vehicle OBD-connector. On Bluetooth, it connects to  anycomputer, tablet or smartphone, with associated diagnostic procedures . Doing these simple operations, you will be

1. Small size, compact structure. Plug and never unplug,ON-OFF Switchallows you to turn off the elm327 totally.

2. Stable bluetooth 3.0 wireless connection

3. No wires or batteries (adapter is powered by the diagnosis size sockets)

4. Stop communication, press the button, no more consumption.

5. Supports all OBDII 9 protocols

6. The adapter uses the fastest and most reliablePIC18F25K80chips

7. The icar2 ELM327 Bluetooth adapter is100% V1.5, support all obd2 commands.

8. 

9. ICar2 Detailed Functin List:

   1.Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).2.Clear trouble codes and turn off the MIL ("Check Engine" light)3.Display current sensor data, including:4.Engine RPM5.Calculated Load Value6.Coolant Temperature7.Fuel System Status8.Vehicle Speed9.Short Term Fuel Trim10.Long Term Fuel Trim11.Intake Manifold Pressure12.Timing Advance13.Intake Air Temperature14.Air Flow Rate15.Absolute Throttle Position16.Oxygen sensor voltages/associated short term fuel trims17.Fuel System status18.Fuel Pressure

   With iCar you will be able to perform a complete computer diagnostics car and even to correct minor faults without resorting to service stations.

   

   V1.5 supports all OBD-II Protocols:

   0.Automatic

   1.SAE J1850 PWM(41.6Kbaud)

   2.SAE J1850 VPW(10.4Kbaud)

   3.ISO9141-2(5 baud init,10.4Kbaud)

   4.ISO14230-4 KWP(5 baud init,10.4 Kbaud)

   5.ISO14230-4 KWP(fast init,10.4 Kbaud)

   6.ISO15765-4 CAN(11bit ID,500 Kbaud)

   7.ISO15765-4 CAN(29bit ID,500 Kbaud)

   8.ISO15765-4 CAN(11bit ID,250 Kbaud)

   9.ISO15765-4 CAN(29bit ID,250 Kbaud)

   A.SAE J1939 CAN(29bit ID,250*Kbaud)

   B.USER1 CAN(11*bit ID,125*Kbaud)

   C.USER2 CAN(11*bit ID,50*kbaud)

   *default settings(user adjustable)

   The OBDII compliant vehicles referernce as below:1996 or newer model year vehicle made in the United StatesFit for Chrysler ,Fit for Ford ,Fit for GM ,Fit for Jeep2004 or newer model year vehicle made in the European UnionFit for Alfa Romeo, Fit for SAAB, Fit for Acura, Fit for Opel, Fit for Audi, Fit for Seat, Fit for Peugeot ,Fit for Renault after 2009 year,doesn't support Clio 2Fit for Bentley ,Fit for Skoda ,Fit for Daewoo, Fit for Benz ,Fit for Daihatsu  ,Fit for Land RoverFit for BMW ,Fit for Vauxhall ,Fit for Citroen, Fit for Volvo ,Fit for Fiat ,Fit for VW ,Fit for Ford ,Fit for Jaguar2008 or newer model year vehicle made in the Asian UnionFit for KIA , Fit for Isuzu ,Fit for Honda ,Fit for Mitsubishi, Fit for Hyundai  ,Fit for Dacia  ,Fit for Lexus ,Fit for MazdaFit for Nissan, Fit for Subaru , Fit for Suzuki, Fit for ToyotaWarm NoticeForLada/ VAZ/ UAZcar makes, please don't purchase If your car is before2011.ForRenault Dacia Logancar model, please don't purchase If your car is before2009.You may also pop the hood and look for a sticker named "VEHICLE EMISSION CONTORL INFORMATION"

   

   NOTE:  Even though it compatible with most cars, but different regions support the vehicle OBD2 protocol at different times, or some car is spercial design, so it may not compatible with some cars which do not support OBD2 protocol. If you're not sure, ask us anytime!

   Notes:Delivery time Note:If your Confirmation Time is coming, you still not receive the goods, please contact us, we will extend the delivery date in advance.No Dispute please:Please do not apply dispute within 60 days, let's keep good business relationship. Thanks for your kind understanding.Step by step guideilnes for ICar2 Bluetooth Adapter1. Locate your OBDII Diagnostic Port. If your car does't have OBDII 16pin Port, you can check the pins on your diagnositc port, we will help you find the connector the convert it to 16pin.

   

   2. Download the Torque APP from android market or install it from our CD.

   

   3. Plug the ELM327 into your car, and it will emit the bluetooth signal, connect it with your cell-phone. Password is "1234".

   4. Open the TORQUE Software, go to"Adapter status" --  "Settings" on top right,

   Select "OBD2 Adapter settings" ;Choose "Connection settings" as "Bluetooth" ;Choose "Bluetooth settings" as "V_LINK" ;EXIT the APP TORQUERestart the TORQUE App, You will see the green light blinking, and wait for a while it will build up the communication.

   

   

   
10.