Yanhua Mini ACDP CAS Module 1 for BMW CAS1 CAS2 CAS3 CAS3+ CAS4 CAS4+ IMMO

Key Programming and Cluster Calibration with License A500 A510 A515 A516

Mini ACDP for BMW CAS Module 01 Main Functions:

(1) Support CAS1 – CAS3+ IMMO key programming by OBD or ICP mode, Cluster Calibration reset, Read/Write EEPROM and FLASH data.
(2) Support CAS4/CAS4+ IMMO key programming in circuit programming (ICP), Cluster Calibration reset, Read/Write EEPROM and FLASH data.

Notice:
1. If you want to do all key lost, you need buy ACDP for BMW ISN Module 3 extra
2. This module can only do Cluster Calibration for CAS system, if you want to Cluster Calibration for dashboard, you need buy ACDP 35XX Module 4 extra

ACDP for BMW CAS Module 1 Main Features:

1. Support CAS1-CAS3+ IMMO key programming and cluster calibration reset through OBD mode.
2. Support CAS3+/3++,CAS4/CAS+ key programming and cluster calibration reset by ICP.
   Data reading and writeing without lifting the pin, No removing any components. Inteliligent detection
3. Support CAS1-CAS4 data resotre. It can modify vehicle frequency, VIN, ISN code, or replace CAS module by modifying EE data
4. Support OBD restore CAS3/CAS3+ problem casued by downgrade

Support for BMW Key Programming for all series.

CAS1-CAS3+ Module:



Key Programming by OBD
Read CAS EEPROM
Add Keys
Reset Cluster Calibration

Back up or recover CAS
All keys Lost 

CAS4/CAS4+ Module:



Read CAS4 EEPROM without soldering/welding
Add Keys without soldering/welding
Reset Cluster Calibration without soldering/welding
Back up or recover CAS without soldering/welding
All keys Lost without soldering/welding 


For BMW CAS1-CAS4+ cluster calibration Programming
No need to remove chip
No need soldering
No need to cut the line
No need to lift the pin

ACDP CAS Module 1 APP Menu:





CAS3/CAS3+Pins Intelligent Detection


CAS4/CAS4+Pins Intelligent Detection


Yanhua ACDP CAS Module Update for Free Read/Write CAS ISN(Replace DME)



ACDP CAS4 OBD Function Free Update:



Yanhua Mini ACDP for BMW CAS Module 1 Free Update


The comparison between ACDP and other devices for reading/writing CAS4

I. The oter devices to use the traditional way--soldering to read/write data
1. Cutting lines
Cutting these two lines on PCB as marked, and soldering them back after reading/writing data is completed. Please note the risk of cutting lines because it may cause the module damage


2. Removing components
Removing these 4 components as marked, and soldering them back after reading/writing data is complete. It is such a long time and complicated operation


3. Lifting pins
Lifting the chip piins for wiring, and soldering them back after reading/writing data is completed. But is if full of risk since the chip pins are easy to break when lifting


II. ACDP reading/writing data by ICP

Advantages:
1. Interface board replaces the soldering to make operation simple and efficient.
2. No cutting lines, no lifting pins, no removing components and no soldering.
3. Pin intelligent detection to ensure data reading/writing safe and reliable.

PS: As you can match keys for CAS1, CAS2 via OBD directly, CAS1, CAS2 interface board not included inside the CAS Module package by default, if you need, you can buy CAS1 CAS2 Interface Board alone(If only you want to read data alone or change cluster calibration, these two adapters need)


FAQ:

Q: acdp module 1 possible to record new key?
A: Yes, it can record new key

Q: If ACDP CAS module can clone CAS4?
A: Yes, it can clone CAS4

Q: I want to do all key lost for BMW F series cas 4 via obd, what modules i need?
A: If you have acdp master basic version already, you just need buy this cas module 1

Q: Whether i can do cluster calibration for bmw x1 2011 cas3+ via obd?
A: For CAS3+, you'd better depart the dashboard, read and write data via acdp bench interface board

Q: I want to ask about Mini ACDP Master (for BMW F series cas 4 ). Can the device make key from into OBD and if all keys are lost or it need to dismantling CAS MODULE.
A: It can work via obd, but if all key lost, you need depart the engine computer to read isn, then operate via obd