Note:Russia overseas warehouse buy one get one free！

Check Engine Error Code Reader Newest YA102 12V Automotive Tester OBD2 Scan Tools

Can YA102 Remove Engine Warning Light ?

Of course, YA102 Supports to remove car engine light,, which has problem on the car OBDII emissions.

1) Turn Off ''Check Engine'' Light
Parts cause your check engine light on include:
1. Gas Cap
2. Oxygen Sensor
3. Air Fuel Ratio Sensor
4. Mass Air Flow Sensor
5. Ignition Coils
6. Spark Plug Wires
7. Spark Plugs
8. Thermostat
9. EGR Valve
10. Evaporatative Emission Canister Purge Valve(EVAP)
11. Catalytic Converter.

2) Decreased fuel consumption; Decreased engine noise; Decreased in temperature , ect .
If the engine light is not turned off in time.it will Cause Serious environmental pollution

Have you met these situation ?

1. High cost from dealer
2. No warranty from workshop
3. No professional yourself

What's Check Engine Error Code Reader YA102?

YA102 is a versatile car fault diagnosis instrument with reading fault code, clearing fault code and supporting multi ECU module battery. Detection, screen capture and other functions. The product is stable, cost-effective, easy to operate and easy to use. Suitable for owners without maintenance experience, not only save maintenance time and money, but also imp-rove the safety factor of driving.

Why Choose the Check Engine Error Code Reader YA102?

1. Support full OBDII diagnostic functions.
2. Multi-Language:
English, Russian, German, Spanish, French, Italian, Portuguese, Japanese, Chinese

3. No need register.
4. Free Update Lifetime:
Just connect with laptop, Copy and Paste the files into removable disk.

5. Screenshot function:
You can press "UP" and "DOWN" buttons simultaneously on this scan tool for 5 seconds to take a screenshot of your viewing data stream and storage inner.

6. DTC Look Up:
Looks up definitions of DTCs stored in scan tool, and shows the possible causes of the DTC. (Not every DTC with possible causes reason)

7. Battery Voltage Test :
This function is used to monitor the voltage present on pin 16 of the OBDII Data Link Connector.
Knowing ahead of your vehicle's battery status

8. Option:
Changes tool option displays tool information, and performs tool self-tests.
9. Unit:
Changes measurement units display metric or imperial.
10. Data Logging:
Turn on /off the data log function to record the device data through vehicle.
11. Self-test:
Display Test . Used to check the display screen.
12. Keyboard Test :
Verifies that the keys are working correctly.
13. Easy to Carry:
The OBD2 scanner's mini size fits comfortably in the palm of your hand. so that you can carry it around no matter in garage or on a trip.

YA102 Supports Full OBD2 Functions (For Engine System) Including:

●Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)
●Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.
●Data Stream: Reads and displays live ECU/PCM data stream, stores freeze frame data.
●I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
●Read Live Data Stream: Show the information of continuous data stream from a vehicle.
●View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
●O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
●On-Board Monitor Test (Mode 6): Retrieves and displays test results for emission-related powertrain components and systems.
●Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
●Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability

OBD-II Compliant

If you are not sure, look under the hood and try to locate a label that explicitly states that the vehicle was designed to comply with OBD2 legislation.

In this case, OBDII is used as a general term and can mean any of the following:

OBD II (California ARB)
EOBD (European OBD)
JOBD (Japanese OBD)

If the vehicle is not OBD-II compliant, you cannot use this OBD2 scan tool to obtain diagnostic information from your vehicle.

Check Engine Error Code Reader YA102 Support OBD 2 protocols car :

ISO15765-4 (CAN)
ISO14230-4 (Keyword Protocol 2000)
ISO9141-2 (Asian, European, Chrysler vehicles)
J1850 VPW (GM vehicles)
J1850 PWM (Ford vehicles)

Support Car Models for OBDII Diagnostic Function:

(Note: YA102 only Support 12V Gasoline & Diesel, Does not support 24V Truck )

American Car :
Need Standard OBD2 Protocols from 2000 to now
for Chrysler , for Ford, for GM, For Jeep ...

European Car :
Need Standard OBD2 Protocols from 2003 to now
For Alfa romeo , for SAAB ,for Acura , for Opel , for Audi for Seat , for Peugeot , for Renault
For Bentley , for Skoda , for Daewoo , for Benz , for Daihatsu , for Land Rover , for BMW , for Vauxhall , for Citroen , for Volvo , for Fiat , for VW , for Ford , for Jaguar...

Japanese/Korean Car:
Need Standard OBD2 Protocols from 2006 to now
for KIA, for Isuzu, for Honda , for Mitsubishi, for Hyundai , for Dacia , for Lexus , for Mazda, for Nissan, for Subaru , for Suzuki, for Toyota...

Notice of I/M Readiness:

* To review I/M Readiness status,make sure that the ignition key is switched to ON with the engine off.
* Not all monitors are supported by all vehicles.There are two types of l/M Readiness tests:
* since DTCs Cleared -shows status of the monitors since the DTCs werelast cleared.
* This Drive Cycle-shows status of monitors since the start of the currentdrive cycle.

Packing List:

1pc * OBDResource OBDII Code Reader YA102
1pc * English User Manual