|
Item specifics
Product Description
Xprog-M Chip ECU OBD2 Tunning Programmer Xprog M V5.55 V6.12 V6.17 V6.26 V6.50 X Prog Box 6.26 6.12 5.55 EEPROM Full Car Adapter Notes of V6.26 and V6.50 1. It has a dongle. 2.MUST Connect Internet,and PC Time MUST Adjust to Accurate Local Time . Otherwise Lose authorization , NO WARRANTY !! 3. Please make sure that you have uninstalled all old Xprog versions on your computer,Because Old versions of Xprog cannot be used with new V6.26/6.50 4.MUST first install 6.26/6.50 registry,then run V6.26/6.50 Software 6. After used,close the software and unplug the usb dongle. 7.The computer's disk must have at least 2 or more partitions, such as C drive and D drive 8.Never try to Update it, the hardware will be damaged if you try to update it online. Warranty will be invalid 9.Please Close all anti-virus software in your computer. Notes of V6.12/6.17/5.55 1. It is without dongle. 2.Don‘t connect to the network during operation. 3. Do not update online. 4. Uninstalle all old Xprog versions on your computer. 5.Operating system: V6.12/6.17 WIN7 64Bits Only;V5.55 WIN7 32Bits Only 6.Never try to Update it, the hardware will be damaged if you try to update it online. Warranty will be invalid 7.Close all anti-virus software in your computer 8.The Xprog V6.12 of our overseas warehouse sometimes may contain A USB Dongle.The specific situation is subject to the condition of the goods at the time of receipt ITEM1:Xprog V6.50 Specification: 1.Software version:V6.50 2.Hardware: V6.8 3.Language: Only English 4.Operating system:Windows 7 64bit V6.50 Added more authorizations:
Packing List: 1pc x XPROG-Box Hardware (Aluminum Enclosure) . 1Set x Adapters 1pc x USB Cable. 1pc x USB Dongle 1pc x CD with XPROG-Box Software V6.50 ITEM2:Xprog V6.26 Specification: 1.Software version:V6.26 2.Hardware: V5.9 3.Language: Only English 4.Operating system:Windows 7 64bit V6.26 Authorizations included:V6.26 Authorizations included: V6.26 Adapters included:V6.26 Adapters included:V6.26 Adapters included:V6.26 Adapters included: Packing List: ITEM3:Xprog V6.12/6.17 PROG 6.12/6.17 Authorizations: AUTH-0001 for Motorola HC05 family/ uthorization (allows to read/write EEPROM) AUTH-0002 for Motorola HC08 family authorization (allows to read/write EEPROM)AUTH-0003 for Motorola HC11 family authorization (allows to read/write EEPROM)AUTH-0004 for Motorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory)AUTH-0005 for Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM)AUTH-0006 for Motorola HC05Bxx and HC05Xxx family bypass security authorization (allows to read/write secured EEPROM and flash memory)AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state.AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state.AUTH-0008 for BMW EWS3 authorizationAUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flash memory)AUTH-0010 for MB ZGS001 authorizationAUTH-0011 for Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory)AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory)AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash)AUTH-0015 MPC5xx authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size)AUTH-0018 for Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory)AUTH-0020 for ARM (Micronas, ...) Family authorization (allows to read/write internal flash and external serial EEPROM)AUTH-0021 for ARM (Micronas, ...) Family bypass security authorization (allows to read/write secured and non-secured internal flash and external serial EEPROM, view/change mileage, Chassis number (VIN), serial number and PIN code).AUTH-0023-1 MAC7xxxAUTH-0023-2 XC23xxAUTH-0024-1 MC9S12CxxAUTH-0024-2 MC9S12XEAUTH-0024-3 9S12XE SECURITYAUTH-0024-4 MC9S12HA/HY/PAUTH-0025-1 MPC/SPC5xxx Authorized 2016/3/13AUTH-0027-1 HC(S)908 update Authorized 2016/3/13AUTH-0027-2 HC(S)908 sercurity Authorized 2016/3/13AUTH-0028-1 for Renesas V850 Authorized 2017/10/9AUTH-0028-2 for Renesas SuperH Authorized 2017/10/9AUTH-0028-3 for Renesas RL78 AuthorizedAUTH-0028-4 for Renesas M32C Authorized
XPROG V6.12/6.17Adapters included: ADP-0001 TMS370 PLCC28 programming adapter QFP144 adaptor Package List: 1pc x XPROG Unit (v6.12/v6.17 optional) ITEM4:Xprog V5.55 Specification: Software Version:V5.55 Support Models:Especially For BMW CAS4 DECYPATION Add new authorization:AUTH-0025 Authorized 11/4/2014 Computer Requires: Processor: INTEL Pentium 60MHz or faster (depends on operating system) Memory (RAM): 64MB (depends on operating system) Hard drive: 20MB free space Communication: One free physical COM or USB port Operating system: WIN7 32Bits Only (close an-virus program,or soft ware attacked) XPROG V5.55 Authorizations: AUTH-0001 for Motorola HC05 family authorization (allows to read/write EEPROM) AUTH-0002 for Motorola HC08 family authorization (allows to read/write EEPROM) AUTH-0003 for Motorola HC11 family authorization (allows to read/write EEPROM) AUTH-0004 for Motorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory) AUTH-0005 for Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM) AUTH-0006 for Motorola HC05Bxx and HC05Xxx family bypass security authorization (allows to read/write secured EEPROM and flash memory) AUTH-0007 for ST M35080 authorization. Read/Write/Erase device to delivery state. AUTH-0008 EWS3 authorization AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flash memory) AUTH-0010 for MB ZGS001 authorization AUTH-0011 for Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory) AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory) AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash) AUTH-0015 MPC5xx authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size) AUTH-0018 for Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory) AUTH-0020 ARM (for Micronas, ...) Family authorization (allows to read/write internal flash and external serial EEPROM) AUTH-0021 ARM (for Micronas, ...) Family bypass security authorization (allows to read/write secured and non-secured internal flash and external serial EEPROM, view/change mileage,chassis number (VIN), serial number and PIN code). AUTH-0023-1 MAC7xxx(New added) AUTH-0023-2 XC23xx(New added) AUTH-0024-1 MC9S12Cxx(New added) AUTH-0024-2 MC9S12XE(New added) AUTH-0024-3 9S12XE SECURITY AUTH-0024-4 MC9S12HA/HY/P AUTH-0025-1 MPC/SPC5xxx (newly added) AUTH-0024-4 MC9S12HA/HY/P AUTH-0025-1 MPC/SPC5xxx (newly added) XPROG V5.55 Adapters: ADP-0001 TMS370 PLCC28 programming adapter ADP-0002 TMS370 PLCC44 programming adapter ADP-0003 TMS370 PLCC68 programming adapter ADP-0004 for Motorola HC05B/X PLCC52 programming adapter ADP-0005 for Motorola HC05B/X QFP64 programming adapter ADP-0006 for ST M35080 in-circuit programming adapter ADP-0008 TMS374 family in-circuit programming adapter ADP-0009 MC68HC05V12 programming adapter ADP-0010 TMS374 on-board programming adapter ADP-0011 HC11EA9/E9 programming adapter ADP-0017 HC(S)12 BDM / ARM Micronas in-circuit programming/bypass security adapter Additional adaptor for 5M48H P-Flash Packing List : 1 x XPROG Unit 19 x Programming Adapter 1 x USB Cable. 1 x CD Software ITEM5:ATMEGA64A Chip Notes: 1. Only applicable to the corresponding xprog version, and does not support any lower version updates. 2. Never try to Update it 3.you must click the correct version registration form before opening the software. 4.Every batch number will be different,but it does not affect .Function are all the same .
1.Some buyers did not install and run the software properly. A software message will appear showing "Waiting for Certificate", which means that the software has not been installed correctly and the certificate has been lost.
2.Some buyer did not run software and click update in wrong operation makes device no working shows"Device is Silent" |
eBike Accessories
Motorcycle Parts