|
Item specifics
Product Description
 -1Pcs Multi-function AUTO Headlight Switch with Sensor ModuleCondition: Modification, Glossy Chrome, Bluetooth Support, High QualityBacklight Color: Red ColorPlease contact us for the setting manual upon the arrival of the switch.We will send it to you via e-mail.ThanksFor IPhone users, please note that our app does not support IOS 14 and 14+ (above) System but it can be used with manual settings. The app is being upgraded, please be patient.For Android system users, please note that our app does not support Android 10 and10+ (above ) System but it can be used with manual settings. The app is being upgraded, please be patient.For VW:Polo, Bora, Bettle, Caddy, Golf MK4, Jetta MK4, Passat B5Jetta 2011-2014 1.6L Note: this switch fits many VW/Skoda/Seat Models which has a big plug switch. but due to difference between China and other countries, the switch is not 100% compatible with part of VW vehicle models. Main Difference between Non-Bluetooth switch and Bluetooth switch: 1, Power saving/Save electricity: ①After locking the car, Bluetooth switch consumes only 0.5mA; Non-Bluetooth Switch consumes about 10mA.② Switch to "O", After locking the car, Bluetooth switch will not consume power, Non-Bluetooth Switch will consume power no matter which gear is placed. 2, Coming/Leaving Home function:For Bluetooth switch, Width lamp/Rearlamp and Low Beam/Headlamp can be set to light alone, or both of them light together.For Non-Bluetooth Switch, only the Headlamp will light. 3. Bluetooth switch can display car voltage on the phone, Non-Bluetooth Switch does not have this feature. 4. Bluetooth switch can turn on the Headlamp after starting the engine, Non-Bluetooth Switch can only delay to turn on the Headlamp after power is on. FUNCTIONS: What is Bluetooth function?You need to install an app on your phone(Android / IOS version), connect the switch with your phone by bluetooth. then you can view the state of the switch or set the parameters through the phone. Some Functions can be supported only for switches with BLUETOOTH Bluetooth Support: Connect switch and your phone App by bluetooth (Bluetooth Only)This switch support Bluetooth 4.0, and android 4.3 + or phone 4s + IOS 7.0 + intelligent device communication. Automatic headlightSwitch to AUTO, lights will turns on/off automatically when Ambient brightness is Lower/Higher than the set value.THREE lighting Modes1. Tunnel mode (Reaction time:1s)2. Normal mode (Reaction time:3s)3. Delay mode (Reaction time:5s) Plug and playAll functions are built-in, just plug and play. Coming / Leaving homeSwitch to AUTO, lock or unlock the car by remote key, if the ambient brightness is lower than the setting sensitivity of low beam, low beam or width light will be turned on/off automatically and turned off after the set time. (time setting range: 0-60s) Sleep and energy savingSwitch to AUTO, if the vehicle is power off and all the lamps turned off, the switch turns to sleep automatically. the power consumption is less than 1mA, the typical value is 0.5mA; If the vehicle is power off, you can switch to "O", the switch will be completely cut off. Lamp detection (Bluetooth Only)Lamp detection function is used to check whether the lamps work well or not. when you connect the switch with your phone, you can control the lamps by APP outside of the car, you can observe whether the lights can be turned on / off normally; The lamp will keep lighting for 10 seconds after you click the button. Showing the battery voltage (Bluetooth Only)Open the App, when the switch connection is successful, the phone screen will display the current voltage of the battery. Software upgrade support (Bluetooth Only)When the vehicle is power on, you can upgrade the software of the switch through the mobile phone. The switch function is not affected during the upgrade process. The intelligent switch will restart automatically after the upgrade.QUICK INSTALLATION: |
eBike Accessories
Motorcycle Parts