- 0Cart
-
Your shopping cart is empty.
-
more items in the cart...
Cart Total: $0.00
Proceed to Checkout
Your shopping cart is empty.
Cart Total: $0.00
Proceed to Checkout
Item specifics
Product Description
Bluetooth 3.0 for Android Bluetooth 4.0 for Android&iOS Vgate iCar Bluetooth 4.0/3.0/wifi ELM327 Features:CLEAR CHECK ENGINE LIGHT - This iCar Pro code reader will help you save money and accurately diagnose check engine light problem. Very easy to use.EASY FITMENT - The majority of cars made in the past 2 decades are fitted with an OBD2 diagnostic port, simply find the port and plug the iCar Pro in.FIT AND FORGET - It really is possible to fit and forget beacuse it's micro size and unique power saving functionality that protects your battery WORKS WITH HUNDREDS OF APPS - The Vgate iCar Pro Bluetooth Low Energy device works with the most popular OBD apps. Please find download instruction for Android device in product description.Icar Pro Functions:Read both nonspecific and manufacturer specific trouble codes.Fast ARM processor allowing up to 30 PID's per second.Read and delete fault codes, Turn off MIL (check engine light). view freeze frame data & I/M readiness monitors. Save money!Read real-time ECU sensor data (Engine RPM. Fuel System status, Fuel Pressure. Oxygen sensor voltages and many readable parameters on your vehicle). Prepare for emission testing.Tips before your purchase:For your vehicle to be OBD II compliant it must have a 16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant. To be sure your vehicle complies with OBD-II, look for a sticker on the vehicle under the hood in the engine compartment that clearly states "OBD II compliant or certified".Vehicle Coverage:Works on all OBD2 Vehicles (1996 onwards in USA) and EOBD vehicles (Petrolcars from 2001 and diesel cars from 2003/2004 in Europe).OBD-II protocols supported:SAE J1850 PWM(41.6 Kbaud)SAE J1850 VPW(10.4 Kbaud)ISO9141-2(5 baud init,10.4 Kbaud)ISO14230-4 KWP(5 baud init,10.4 Kbaud)ISO14230-4 KWP(fast init,10.4 Kbaud)ISO15765-4 CAN(11bit ID,500 Kbaud)ISO15765-4 CAN(29bit ID,500 Kbaud)ISO15765-4 CAN(11bit ID,250 Kbaud)ISO15765-4 CAN(29bit ID,250 Kbaud)SAE J1939 CAN(29bit ID,250* Kbaud)USER1 CAN(11*bit ID,125* Kbaud)USER2 CAN(11*bit ID,50* kbaud)ELM327 BT4.0/3.0/wifi model versionHome screenGo to setting pageSelect V-LINK Default password is "1234"Device pairedRun Torque appGo to Torque app OBD II adapter settingChoose connecion type>BluetoothChoose Bluetooth device>V-LINKExit Torque app completelyRunTorque appConnectedVgate iCAR Pro Setting guide:1. BT3.0 model versionHome screen èGo to setting page ,select V-LINK èDefault password is "1234" èDevice paired èRun Torque appèGo to Torque app OBD II adapter setting,Choose connecion type>Bluetooth,choose Bluetooth device>V-LINKèExit Torque app completelyèRun Torque appèConnected2. BLE4.0 Dual mode version:Android :Home screen èGo to setting page ,select V-LINK èDefault password is "1234" èDevice paired èRun Torque appèGo to Torque app OBD II adapter setting,Choose connecion type>Bluetooth,choose Bluetooth device>V-LINKèExit Torque app completelyèRun Torque appèConnectediOS :Home screenèGo to setting page ,click on Bluetooth function ( Device name is invisible)èRun Accurate appèGo to Accurate app setting page,select Bluetooth and connect èExit Accurate app and run again èConnected3. Wi-Fi versionAndroid < Torque app>Home screen èGo to setting page ,open Wi-Fi è Run Torque appèGo to Torque app OBD II adapter settings , choose connection type>Wi-Fi ,then set Wi-Fi preferences in the same page,IP address is 192.168.0.10 .Port is 35000è Exit Torque app completelyèRun Torque appèConnectediOSHome screenèGo to setting page,Open Wi-Fi ,Select V-LINKèRun Accurate appèGo to Accurate app setting page,select Wi-Fi èExit app completely èRun Accurate app again èConnectedvgate iCAR Pro Cautions & Warnings:Please read following tips before you use the Vgate iCar OBD II adapterPlease plug the OBDII adapter correctly into your car by following the installation instructions before operating.When driving the car, please do not operate this unit. Any distraction may cause an accident.OBDII adapter communicates with cars via Wi-Fi/BT. Please do not use this product in the places with strong electro-magneti interference in order to ensure proper communication.Specification:Supply Voltage:11.5V-15VSupply Current:<200MaStandby Current:<30Ma ( TONWON Pro=<3Ma )Operating Temperature:-40℃--85℃Operating Humidity:5%--95%RH Non-DewfallVgate iCar ProPackage Includes:1pc x Vgate iCar Pro Bluetooth 4.0/3.0/wifi OBDII adapter1pc x User manualHow to Pair iCar Pro to your device (use OBD Auto Doctor)Pair iCar Pro Wi-Fi to iOS deviceStep 1:(1)Enable WLAN on your iPhone or iPad(2)Choice V-LINK to connect(3)Connected<V-LINK>Step 2: Configure connectivity setting on the OBD Auto Doctor(1)Run OBD Auto Doctor app(2)Tap Extras button on the Status page(3)Tap Connectivity in the setting menu to select connection type(4)Select adapter type to Wi-Fi (IP address 192.168.0.10 ,Port 35000 is automated. Please don't change it)(5)Back to Status page, Click Start connect(6)Initial adapter and connecting to vehicle .Bluetooth indicator LED (BLUE)and OBD data indicator (GREEN) keep blinking while system connecting.It will take about 30 seconds to connect(7)Connected. All LED indicators lights on while sync data from vehiclePair iCar Pro Wi-Fi to Android deviceStep 1:(1)Enable Wi-Fi on your Andriod phone or Pad(2)Select Wi-Fi device " V-LINK" to pair(3)Get PairedStep 2: Configure connectivity setting on the OBD Auto Doctor(1)Run OBD Auto Doctor app(2)Tap Extras button on status page(3)Tap Connectivity in the setting menu to select connection type(4)Select adapter type to Wi-Fi. (IP address 192.168.0.10 ,Port 35000 is automated. Please don't change it)(5)Back to Status page,click to start connect(6)Initial adapter and connecting to vehicle .Bluetooth indicator LED (BLUE)and OBD data indicator (GREEN) keep blinking while system connecting.It will take about 30 seconds to connect(7)Connected. All LED indicators lights on while sync data from vehiclePair iCar Pro BT 3.0&4.0 to your deviceStep 1:(1).Enable Bluetooth on your Android Phone or Pad(2).Turn on Bluetooth,Enable visibility(3).Select Bluetooth device as " V-LINK" to pair. Enter password "1234"(4).Get PairedStep 2: Configure connectivity setting on the OBD Auto Doctor(1).Run OBD Auto Doctor app(2).Tap Extras button on status page(3).Tap Connectivity in the setting menu to select connection type(4).Select adapter type to Bluetooth.Device name showing "V-LINK"(5).Back to Status page,click to start connect(6).Initial adapter and connecting to vehicle .Bluetooth indicator LED (BLUE)and OBD data indicator (GREEN) keep blinking while system connecting.It will take about 30 seconds to connect(7).Connected. All LED indicators lights on while sync data from vehicle |