6 Reasons For Choosing VC300

*HD Screen for color-screen display
*Highly Sensitive Probe for accurate gauge
*360° Rotatable Scree for Multi-faceted use
*Two Gauge Models for choosing
*Voice Broadcast saving more time *Automatic shutdown selection function

The VC300 is a color-screen portable coating thickness gauge with high-definition display,which can quickly,non-destructively and accurately measure non-magnetic coating thickness on magnetic metal substrates and non-metallic coating thickness measurement on non-magnetic metal substrates.At the same time it can automatically identify magnetic metal substrate and nin-magnetic metal substrate,and is widely used in manufacturing,metal processing industry,chemical industry,commodity inspection and other testing areas.

8 Features

1.Meny operation and color-screen HD display.
2.Voice broadcast function.
3.There are two measurement methods, single and continuous.
4.The thickness measurement of the non-magnetic coating on the surface of the magnetic metal substrate and the thickness measurement of the non-metal coating on the non-magnetic metal substrate.
5.It has two calibration functions: basic and zero point.
6.Metric and English unit selection and storage function.
7.Screen rotation, charging protection, multiple interface display, screen brightness selection.
8.Automatic shutdown selection function.

Calibration Operation

1.Basic Calibration:
a.Prepare the calibration plate and calibration base,enter calibration menu and select basic calibration.
b.According to the instrument instruction,place the corresponding calibration plate for calibration.
c.After calibration is completed,"calibration complete"will show up at the bottom of the screen and the instrument will return to the previous interface.
d.After the calibration is complete,you can go back to measurement interface and perform measurement.
e.Magnetic and non-magnetic metal base calibration do not affect each other.

Note:When preforming basic calibration,press the instrument onto substrate when the arrow is down,and remove it when the arrow is up.

2.Zero Calibration:
a.Enter calibration menu and select zero calibration.
b.Lightly press the instrument onto substrate.
c.The instrument will automatically calibrate to zero point.
d.The instrument displays the previous interface after calibration is done.
e.After calibration is complete,you can go back to meansurement interface and perform measurements.

How to judge automobile paint?

The thickness of the original car paint is between 100-200um,but the thickness of the touch up paint will be clear.It may be 500-1000um or even thicker.
According to the standard of economical automobile,the paint surface of automobile should not be less than 90um,90um is regarded as cutting corners.
For any cars standard higher than USD50000,the paint surface shall not be lower than 120um(hard index) Below 120um is considered as cutting corners.

The VC300 is charged with usb cable