3. Majority for moderm modules are accessoible only through this protocol.

4. Beside added functionality, this device works as normal OBD2/EOBD code reader on all supported vehicels.

5. When you use it with software of FoCCCus. It just supports 2 kinds of languages: English & Russian.

When you use it for other cars. It can support 13 kinds languages:

Czech,Danish,German,English,Spanish,French,Croatian,Hungarian,Italian,Polish,Serbian,Turkish and russian

6. V1.5 elm327 supports 9 kinds of protocols. But V2.1 elm327 just supports 7 kinds of protocols. It supports more cars and better quality than V2.1 elm327.

7. This one ONLY works with gasoline car .It can NOT work with diesel car.

It works with almost any brands of gasoline car.

As this device can support multi-brands and we do not test it on all cars, we can not make sure whether it can be used on your car, maybe you can buy one to have a try. Many thanks.

ELM327 USB Switch Descriptions:
One ELM327 OBDII OBD2 USB with switch. Designed for communicating for Mazda, for Lincoln and for Mercury vehicles. With this cable and the one of the supported software vendors you can detected modules which are not visible for regular obd2 scanners. This includes showing you trouble codes,PINDS,
running tests and services procedures which are never displayed by other OBD2 scanners and a standard ELM327.



 ELM327 USB Switch Features:  
1. Latest ELM327 version for greater compatibility
2. Manufactured modification to include a switch to connect to different CAN buses
3. Designed for FORScan software

4. Supported software:

for FORScan

for Elmconfig

for FoCCCus

for FF2

for Plus more

5. Support MS CAN bus and HS CAN bus, easily switchable for different CAN speeds.
Switch position one: HS CAN - Occupies pins 6 and 14
Switch position two: MS CAN - Occupies pins 3 and 11

6.Hidden function Support car list:

2006-2016 classical for Focus

2012-2015 new for Focus

2013-2015 for Kuga

Please note that many, for Mazda models (approximately since 2003-2004) are equipped with MS CAN bus, in addition to the regular HS CAN bus. In contrast to HS CAN bus, MS CAN bus is not supported by the stock ELM327, because MS CAN
is a manufacturer-specific solution and located on non-OBD2 pins. This ELM327 has been modified to allow it to implement the MS CAN bus.
ELM327 supports HS CAN from the stock, because CAN completely matches to the OBD2 standards. It occupies pins 6 and 14. MS CAN bus occupies pins 3 and 11.

ELM327 USB Switch Functions:

Read/erase fault codes/parameter ids (PIDs) from ALL modules, including OBD2/EOBD

Access modules on both HS-CAN and MS-CAN mode

Read and Change car configuration data

Actuator tests

Live Data

Injector coding

Software updates

Service procedures

Force DPF regeneration

Programming

Coding

Adaptations

Run tests

Air Flow Rate

Display and read

Engine RPM

Vehicle Speed

Intake Air Temperature

Long Term Fuel Trim

Short Term Fuel Trim

Timing Advance

Oxygen Sensors

Fuel System status

 

ELM327 USB Switch Support Car List:

For MAZDA
For BMW
For VW
For GM
For AUDI
For CHEVY
For TOYOTA
For LEXUS
For Lincoln
For MERCEDES
For Mercury
For HYUNDAI
For KIA
For MITSUBISHI
For NISSAN
For SUZUKI
For JAGUAR
For LAND ROVER
For  CHRYSLER
For HONDA
AND SO MUCH MORE!

 

ELM327 USB Switch Support OBD2 Protocols:

SAE J1850 PWM(41.6Kbaud)

SAE J1850 VPW(10.4Kbaud)

ISO9141-2(5 baud init,10.4Kbaud)

ISO14230-4 KWP(5 baud init,10.4 Kbaud)

ISO14230-4 KWP(fast init,10.4 Kbaud)

ISO15765-4 CAN(11bit ID,500 Kbaud)

ISO15765-4 CAN(29bit ID,500 Kbaud)

ISO15765-4 CAN(11bit ID,250 Kbaud)
 

ELM327 USB Switch Packing List:

1*ELM327 USB Switc

1*CD