Upgraded Lite Version Lexia 3with Firmware 921815C Golden Edge Diagbox V9.91 Lexia3 PP2000 Lexia3 Car Diagnostic Tool

Lexia-3 PP2000 Diagnostic Tool Description:

1. It is compatible with for Citroen cars including: C1,C2,C3,C4,C6,C8,for C-CROSSER for NEMO for BERLINGO for JUMPY for JUMPER for AX for SAXO for BX and so on.

2. It is compatible with for most Peugeot cars from 1995.

3. Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).

Notice:

PP2000 and lexia softare only be installed in XP system 32 bit, Diagbox software only be installed in win 7 system 32 bit.

Pls don't install lexia and pp2000 software together with diagbox software in one pc . diagbox software has included pp2000 and lexia software , Diagbox need be installed in one laptop individually.

When installing software, pls close your anti-virus software and firewall. otherwise anti-virus software and firewall will destroy software and your pc system .

The CD is the default V7.83, if you need the latest software link, please feel free to contact us, please do not leave negative feedback and disputes

If you want to buy a full chip, please click here：FULL CHIP LEXIA

Language

English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech

Top 7 reasons to get myDIAGBOX V9.91:

1.V9.91 Support all compatible cars Untill 2021

2.V9.91 work for Citroen/for Peogeot/DS Automobiles/for Opel Multi-Brands

3.V9.91 pre-activated version, install directly,

no need to wait seller to activate for you,save time and money .

But must run V9.68 on VM (Virtual Machine),VM installation is easy and fast.

We provide VM installation video and V9.68 installation video !

4.V9.91 Full function version:

Diagnose, Resets, Adaptations,Telecoding of Modules....

Excellent Live test byexperts of automotive repair over the world , they confirm the good feature of the release .

5.V9.91 Support win7 / win8 / win10 ( ONLY work on 64bit )

6.V9.91 FULL in 24 languages BUT on the Virtual Machine loaded in English.

7.V9.91 can work with any version of lexia3 / lexia XS

Top 5 Reasons to Get Lexia-3 PP2000 Diagnostic Tool:

1.PP2000/LEXIA-3 Interface works for both for Citroen and for Peugeot!

2. Diagbox software is latest version:V9.91

3.Support Multi-Language: English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech

4.Software support update by CD.

5:Ours is the  A+++++ Quality than others

Lexia3 PCB Board Display :

LEXIA-3/PP2000 Function:

Unlike other universal car scanner tools which only read fault codes; this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains for K-Line multiplexor, for CAN-BUS interfaces and for SAE J1850 bus (both for PWM and for VPW).

1. Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...

2. Read fault codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.

3. Clear fault codes
this function clears all stored fault codes and other diagnostic information.

4. Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.

5. Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.

6. Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)

The following diagnostic functions are supported：

1. Read identification - Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...
2. Read fault codes - Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure"). Program supports report printing or copy to clipboard.
3. Clear fault codes - This function clears all stored fault codes and other diagnostic information.
4. Auto-scan (complete car scan/test) - Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
5. Measured values - Program displays live data like engine speed, battery voltage, oxygen sensor, coolant temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported which allows offline analysis.
6. Actuator test - Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc.)
7. Programming functions/adaption - This feature is important in all vehicles because systems like engine control units, immobilizers, airbags, alarms, body control units, and some others, require you to perform reset or programming procedures after car repairs.
8. Control unit

LEXIA-3/PP2000 Specification:

1.Hardware and software requirements

Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.
If customer requires, we can prepare ready to work PC.

Please setup the software according to the requirements to hardware and software. Otherwise it will fail to setup and bring you much trouble.

Better to install the software on the computer with Windows XP system.

Better to close the Anti-virus software on your computer. Because the Anti-virus may recognize it as a type of virus, it will clear off all the software on the CD.

Top 7 reasons to get DIAGBOX V9.68:

1.V9.68 release on 04/2020, Support all compatible cars Untill 2020

2.V9.68 work for Citroen/Peogeot/DS Automobiles/Opel Multi-Brands

3.V9.68 pre-activated version, install directly,

no need to wait seller to activate for you,save time and money .

But must run V9.68 on VM (Virtual Machine),VM installation is easy and fast.

We provide VM installation video and V9.68 installation video !

4.V9.68 Full function version:

Diagnose, Resets, Adaptations,Telecoding of Modules....

Excellent Live test byexperts of automotive repair over the world , they confirm the good feature of the release .

5.V9.68 Support win7 / win8 / win10 ( 32bit/64bit both ok )

6.V9.68FULL in 24 languages BUT on the Virtual Machine loaded in English.

If you would like to change the language from English to any of rest 23 Diagbox 9.68 supported languages, simply follow instructions in Diagbox change language PDF.

7.V9.68 can work with any version of lexia3 / lexia XS

Package List:

1pc x  Main unit with extension OBD2 cable
1pc x  Long USB cable
1pc x  Short USB cable
1pc x  CD