Universal Motorcycle Dashboard 1-4 cylinder Speedometer Odometer Tachometer LCD Digital Motorcycle Oil Meter Multifunction Gauge

specification:

Universal for all DC 12V motorcycles, adjustable 8-22 inch wheels

All-in-one function: speedometer, odometer, tachometer, fuel level display, left and right indicator, N-range, battery, water temperature indicator

Suitable for all types of motorcycles, 1 cylinder, 2 cylinders and 4 cylinders (4-stroke motorcycle disc brake front tires)

Gear speed display in kilometers or miles

Working voltage: 9-16V

Working temperature: -30-85 ° C

Size: about 17.5x8x4cm (length * width * height, as shown)

Function:

- Switch between mph and km / h

Travel distance clear

- Digital display speed, speed range 0-199km / h or mph;

- the number shows the trip, the distance range is 0-999.9km or miles;

- the number shows the odo distance, the distance range is 0-99999.9km or miles;

-LED shows oil level, low oil warning and flashing;

- Needle display speed, range 0-13000

-LED displays left and right direction lights, N, high beam lights, etc.

-time

- adjustable track

- adjustable pulse

benefit:

1) Applicable to vehicles of different diameters;

2) Applicable to vehicles with different displacements;

3) Easy to assemble, we provide an installation manual.

4) This speedometer is sent together with a speed sensor with a length of 950mm; (speedometer is Hall effect, universal)

Note: RPM is not compatible with EFI engines

Skill requirements:

1) The working power of the instrument is DC12V.

2) Metric switching: Press and hold the SET button and the vehicle speed will flash. At this time, press the ADJ button to modify. If there is no operation for 15 seconds, it will automatically exit and take effect. You can also press twice to take effect.

3) LCD display, total TOTAL maximum 99999.9, TRIP maximum 99.9. Short press the SET button, TOTAL and TRIP switch; during the trip, press and hold the ADJ button for 4 seconds to trip. Press and hold the ADJ button to power up, a total of 200, can be operated 3 times.

4) Change the oil prompt: every 2000km oil lamp lights up, prompt to change the oil, when the oil lamp is on, switch to TOTAL, press and hold the ADJ button for 4 seconds, the oil lamp goes out.

5) Clock: 12-hour system, long press the SET button, the vehicle speed flashes, press the SET button once - once, the clock flashes, then short press the SET button - once, the clock minute flashes. When flashing, press the ADJ button to modify it. If there is no operation within 15 seconds, it will automatically exit and take effect. You can also press the SET button to exit and take effect. 6. Background setting: You can set the speed, number of cylinders, two-wire / three-wire sensor, then press and hold the SET button, then open the door. The LCD will jump from 0 to 9, then jump to the setup interface. The default display is 018 1 2. Position, engine fault light, water temperature light negative control; left and right turn signal, high beam, positive control

Package Included:

-1pc x speedometer

-1pc x sensor

-1 set of x mounting accessories

note:

- Due to manual measurement, please allow a difference of 1-10mm.

- The color of the item may be slightly different from the picture due to light and screen differences

.