Description
Customer Reviews(0)

Item specifics

Origin CN(Origin)
Manufacturer Part Number For Subaru Impreza WRX / STI EJ20 EJ25 engine 2002-2006
OEM NO. TD05 20G Turbine Turbocharger
Other Part Number TD05-20G Turbolader
Placement on Vehicle Placement on Vehicle
Material Type K418 alloy steel and Alloy aluminum
Item Length 26cm
Special Features Balanced by Schenker
Item Width 25cm
Country/Region of Manufacture China
Item Height 23cm
Interchange Part Number TD05-20G Turbine
Item Weight 8kg
Bearing: Wet Float/Journal Bearing
Claims: No any proprietary rights affiliate and sponsorship with the third party marks.
Cooling Type: Water + Oil Cooled
Max HP 450HP
Notice If your old turbo is TD04 one some modification is required.
Product Note: Due to the light and different screen display the picture and product maybe slightly different.
Product Type: This is aftermarket replacement part
Turbine Housing Flange: WRX 3 Bolts
Warranty: 2 YEARS
Wastegate Internal

Product Description

It's a upgraded Turbo for advanced drivers. MXR TD05 20G Turbo customizes a unique specification that replaces the TD04 for a TD05H turbine wheel.Furthermore, MXR also enlarges the turbine housing area to 7 square cm to improve the exhaust efficiency. so expect to gain more power than stock turbo.

Turbo TD05 20G Turbocharger For Subaru Impreza WRX STI EJ20 EJ25 420HP Water+Oil Cooled 02-06

Application
Direct bolt on all for Subaru Impreza WRX / STI EJ20 EJ25 engine 2002-2006

Specification

Turbine Trim: 76.4
Turbine Inducer Diameter:56mm
Turbine Exducer Diameter: 48.96mm
Compressor Trim: 59.8
Compressor Inducer Diameter: 52.6mm
Compressor Exducer Diameter:67.9mm
Bearing: Wet Float/Journal Bearing
Cooling Type: Water + Oil
Warranty: 2 Years for any manufacture defects
Turbine housing: 7cm2
Compressor housing inlet OD: 57.8mm （about 2.25 inch）
Oil feed: M10*1.5
Oil drain: M16.8

Oil drain screw：2*M6*1.0
Water in/out: M14*1.5

Features:

*Product Material
1. Turbine housing ：Ductile iron QT450-10 - temperature resistant up to 700℃
2. Steel turbine wheel：K418 alloy - high oxidation stability and resistance up to 900℃
3. Compressor housing：ZL104 aluminum with lightweight
4. Compressor wheel/blades：Cast aluminium blades – superior air tightness & corrosion resistance

*Product Performance
1. Cost-effective turbo increase 20-40% power for your car
2. Rich experience in turbo production and own factory
3. High-Speed oil seal ring and Precision clearance
4. Built for durability and strength

* Technology Advantage:
1. 100% balancing Test by TURBOTECHNICS VSR3
2. Advanced Actuator Tester/Programmer

Notice

* Please check the specifications carefully before buying. If you are not sure about these information, please feel free to contact us.
* All WRX Wagon engines and automatic sedan engines came with a TD04,all manual WRX sedans including STI versions had a TD05. If your old turbo is TD04 one, some modification is required to fit the new turbo.
* It's a direct bolt-on so nothing else would be required. But, to get it's full potential you'd need some additional upgrades. Intake, exhaust, more fuel, etc. it will also require custom tuning.
* Professional installation is highly recommended(No Instruction Included)