Smart Bike Light Wireless Remote Control Cycling Turning Signal Taillight NB04

Product name: Remote Control Turning Tail Light
Bead Type: LED
Battery Capacity: 2000 mAh
Product Color: Black
Charging time: about 3 hours
Light: Red Light
Working time: 12 hours for 100% Lighting
40 hours for breath lighting
Prodcut size: 11*5.5*3 cm
Product weight: About 120g

There are 7 different modes

<< Turn Left / Turn Right >> / Up to down Lighting /Left to right Lighting / Breathing light / 100% Lighting / Flash Lighting

Waterproof Bike Taillight

2000 mAh Large Usb rechargeable Battery

Charging time: about 3 hours
Working time: about 12 hours for 100% Lighting
about 40 hours for breath lighting

What is the Product Size

Battery indicator

How to install

NB06

Name: Remote Bicycle Tail Light, Bicycle Rearlight
Brightness: 85LM
Battery: 2200mAh
Light: 7~10 hours
Material: ABS+Metal
Whether remote control: YES
Warning LED: RED and YELLOW flashing

IPX4 Waterproof level make this bike turning light can be used in small to moderate rain in the temperature of in -4-140°F -- your best partner for outdoor biking.

Squibomb bike tail light with turn signal has 85LM LED lights, bright enough to be seen from 150ft away in foggy/rainy day or even in dark night.

Remote control the bike tail light to send signals in different modes by the 5 easy to use buttons on the wireless controller. Remote control on handlebar, easy for cyclist to control during riding. Suitable for Mountain, MTB and Road Bicycles.

The bike turn signals use 2200mAh Li-on battery, allow the bike tail light to be fully charge in 3-4 hours and can work for about 7 hours under constant brightness. The remote control use 180mAh Li-on battery, which can keep working for more than 2 months after 1-2 hours fully charge. Both the signal light and remote control can be charged from any USB Port, convenient

Take out the turn signal and the fixed support in the packing box, along the grooves, slide the fixed support in grooves and snap the buckle. Put the loaded turn signal on the bicycle seat tube and tighten it with screws.
The remote control is fixed on the bike handle and tighten it up with a screwdriver.

NB02

Name: Bicycle Rearlight, Remote Bicycle Tail Light
Brightness: 100LM
Warning LED: RED flashing
Size: 85x22mm
Weight: 30g
Battery: 500mAh
Material: ABS+Metal

High quality remote control LED directional light is used for night use, such as cycling, baby carriage, jogging, walking, road emergency and camping.

Main Light Function Control:

-Click:Main light is on, entering the long-time lighting mode.
Click again to enter the slow flashing mode.
Click again to enter the fast flashing mode.
Finally, click it to turn off the main light
-Left button:Click, the left turn signal light flashes 25 times
-Right button:Click, the right turn signal light flashes 25 times

USB RECHARGEABLE

Packing list - red or black

NB03

Name: Bicycle Rearlight, Remote Control Bicycle Direction Lamp
Brightness: 50LM
Size: 125x40mm
Warning LED: RED and BLUE flashing
Light charging time is 2~3 hours, a full charge can last 4~5 hours

High quality remote control LED directional light is used for night use, such as cycling, baby carriage, jogging, walking, road emergency and camping. Its directional flashing indicates that night travel safety factor is greatly enhanced.

Bicycle light function:

1. Remote Control: A total of 3 buttons
1)The left turn key: Press the left turn button ,the button indicator flashes, and the rear left turn indicator flashes, and then press the button to turn off the indicator light.
2) Right turn key: Press the right turn button, the button indicator flashes, and the rear right turn indicator flashes, and then press the button to turn off the indicator light
3) LED light key: press the LED button, the button indicator is always on ,and the red light in the tail lamp is always on.Press the LED button again, the button light flashes, and the red light in the rear light blinks. Press the LED button for the third time, and turn off the red light on the tail light

2. Tail lights: a switch button, red LED warning light, yellow LED indicator light.

USB Chargeable

The details

NB01

Name: Bicycle Rearlight, Remote Bicycle Tail Light
Brightness: 50LM
Warning LED: RED flashing
Size: 88x27x25mm
Weight: 80g
Battery: 1200mAh
Material: ABS+Metal