Thino Tuning Smoke Tester For Car The Main Function：

1,Intake System Test: it can test the air tightness and damage degree of the pipes in the intake system.

2,Exhaust System Test: it can test the air tightness and damage degree of the pipes in the exhaust system.

3,EVAP System Test: it can test the leakage of fuel evaporation in the EVAP system.

➤Crankcase System Test

➤Intake System Test

➤Car Sealing Test

➤Fuel Tank System Test

➤Turbo System Test

➤EVAP System Test

➤Exhaust System Test

➤Various Pipe Fittings Test

OVERHEAT & ANTI-FROST PROTECTION

1,Overheat Protection:When the temperature of the device exceeds 75℃,power protection will be intelligently activated to turn it off.

2,Anti-frost Protection:The device can also work normally at -20℃

Main Unit Structure :

Power Switch: Power it on, and the detector works

Smoke Output Tube: The smoke outlet which connecting with detection port

Power Clamp: To connect with vehicle battery. The voltage is DC12V.

Rhino Tuning Car Smoke Leak Detector Features：

1.[Wide range of applications] For detecting the leakage of pipe systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats.Works on all car makes and models.

2.[Powerful and easy to operate] The Rhino Tubing has its own air pump, it does not rely on other air machine ,Connect the detector with DC12V battery,It can be outputs lots of Smoke within 20 seconds after turning on.

3.[Advanced technology] It works on the EVAP system (we also have another version that specially designed for EVAP system).

4.[3 years warranty] For damage caused by non-human factors, we promise to resend parts for free within 3 years.

How to do Leakage test ?

1. Fill 20ml baby oil to the detector for the first time. Open the engine cover, and hang the detector in the cover.

2. Disconnect the pipe that needs to be connected with detector.

3. Connect detector with DC12V battery, turn on the power switch, and the detector starts to work

4. In about 8 seconds, the pipe will be filled with smoke. Check the leak points.

Caution：

1.When you use this Rhino Tuning Car Smoke Leak Detector for the first time, fill with 10-20ml oil.Please be careful NOT to beyond this range.

2.The testing liquid : both liquid paraffin and baby oil are OK.

3.Fresh oil can be filled with only when the smoke gets thin, and it can’t be filled over 20ml each time.

4.Before filling fresh oil, please pour out the left oil in the detector & replace the detector oil regularly.

5. During the process of leak detection, please keep away from smoke-sensitive parts.

6. Do NOT run the detector over 8 minutes continuously. It needs interval rest.

7. The detector has an intelligent protector, if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power. In this case, please operate it later.

8.The round part of this detector has temperature, please be careful to avoid burns.

9. If the test pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple.

[Contactus]

Our smoke tester has been strictly tested before leaving the factory. Due to the long

transportation distance, some products may be damaged during transportation. If you encounter problems

during use, or are not satisfied after receiving the goods, you can contact us directly, and we will re-ship or

exchange for you. We provide unconditional returns, you do not need to bear any risk.