Product Description

100% Brand New

PRODUCT TYPE : Filter Fuel/water Separator

This fuel filter water separator screens out dirt, rust and other particles from the fuel before entering the system of the vehicle. Undesired substances that are not filtered may cause rapid wear of the fuel pump, injectors and worse cause them to fail.

Features

☆Large fuel filtering capacity than standard fuel filters.

☆Clear bowl lets you know when it's time to drain the water.

☆Visibility of fuel quality being used.

☆Flexibility of inlet and outlet configurations capable of filtering from 2 sources.

Replaces Part Numbers:

-Replaces Mercury 35-60494-1.

-Replaces Racor S3213, B32013,18-7932-1,18-7932,18-7928-1,18-7928.

-Filter Replaces Mercury Marine 35-809097, Racor S3213, Yamaha MAR-24563-03-00, 18-7919,18-7919-1.

Operation Guide To Drain Water

1. Loosen self-venting drain plug to drain water from bowl into a container.

2. Tighten drain.

3. Use primer bulb to fill filter with fuel.

4. Start engine and check ensure there are no leaks.

To replace element:

1.Drain the unit by loosens the drain screw.

2.Loosen and remove the filter element.

3.Loosen and remove the bowl from filter element.Please note the bowl is reusable,do not dispose unless broken.

4.Wipe O-ring gland clean,and coat bowl's sealing O-ring with clean oil or grease and place it back to the gland.The tighten the bowl onto filter element firmly by hand.

5.Coat filter element's sealing O-ring with clean oil or grease and attach filter element onto filter head,and the tighten securely by hand.

6.Run engine and check for fuel leakage.