Item specifics
-
Brand Name
LARATH
-
Origin
CN(Origin)
-
Item Height
16CM
-
Interchange Part Number
120AT
-
Material Type
Aluminum
-
Item Weight
580g
-
Manufacturer Part Number
120AT
R12T
-
Item Length
8CM
-
OEM NO.
120AT
R12T
-
Special Features
fuel water separator
-
Other Part Number
Racor 120AT
-
Item Width
8.5CM
-
Country/Region of Manufacture
China
-
Placement on Vehicle
Fuel Inlet
-
Apply to
Racor 140R 120AT S3240 NPT ZG1
-
model
R12T
-
feature1
gasoline engine
-
feature2
Petrol Engine
R12T fuel / water separator filter Diesel engine for Racor 140R 120AT S3240 NPT ZG1 / 4-19 Complete Parts Complete Combo The filter units are coated with a durable electrostatically applied powder coating for superior corrosion resistance. This spin-on filter design is simple to replace and the reusable clear nylon collection bowl and features a self-venting drain for removing unwanted muck and water.Tighten the valve, the water will not discharge. Release the valve, the water can be free to discharge. Filters are designed for high performance applications, and with flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean, water-free fuel. product description: Specification: 1.Fuel Water Separating Filter fit 3/8 Inch NPT Outboard Motors as well. 2.Maximum Flow Rate 30 GPH (57 LPH). 3.Port / Connecting Size M18 X 1.5 Center Thread. 4.These are more suited to compact off road diesel equipment:tractors,skid steers loaders,movers. 5.Filter Rating 10 Micron.10 micron filters are over 90% efficient at removing particles as small as 10 microns. 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems, Designed to trap the smallest particles and emulsified water from Diesel.
R12T water separator and filter complete combo installation instruction:
1.Nylon collection bowl down when installed the water separator and filter.
2.This filter has four ports, two inputs and two outputs. We provide two plugs for the extra two ports. If you need to use two plugs, you must install them to the filter and tighten them.
3.Before installing the filter, you have to remove those plugs, teflon-tape them, and re-install them.Prevent leaks from these plugs.
4.All of the above steps are very simple to operate, you can manually disassemble, and then use the tool to install tighten.
|