Selling Point

Note1:

Pls Use the vehicle fitment we've provided within the body of the listing to confirm vehicle fitment.If you can not make sure which item fit for your car,please send the VIN CODE to us confirm it before order.

Note2:

【No sensor programming Required】 :
The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or "re-learning".
Simplified Relearn : OBDII required
Installation of TPMS is recommended to be performed only by trained professionals.

SPECIFICATION :
Replace For Part Number:

PMV-107K,42607-50011,42607-50010

Battery Life: ABOUT 3 YEARS
Operating Frequency: 433MHz

PACKAGE CONTENT :
NORMAL PACKET

Application

For Lexus ES(from 2006-08 to 2012-08)
For Lexus GS(from 2005-01 to 2012-02)
For Lexus IS C(from 2005-10 to 2013-04)
For Lexus LS(from 2006-09 to 2012-12)
For Toyota Land Cruiser 200(from 2007-09 to 2011-12)
For Toyota RAV4 III(from 2005-11 to 2013-01)

COMPREHENSIVE VEHICLE COVERAGE

Installation Process
1. Loosen the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.

COMPREHENSIVE VEHICLE COVERAGE

Installation Process
1. Loosen the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.

Q: 【Did they tpms sensor need to make program】

A: The Tire Pressure Sensor come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or "re-learning".

Q:【 Relearn Procedure 】

A: OBDII required