Why need GPS odometer + speed, cadence and heart rate monitor?

The speed cadence sensor can provide mobile phone or GPS computer with cadence data that it cannot obtain, helping the driver to obtain a good energy output power ratio, and avoid energy loss caused by too fast or too slow cadence.

Measuring heart rate allows you to exercise without having to guess mastering the right intensity to help you achieve your goals efficiently and avoiding excessive or insufficient exercise through heart rate detection,It is easy to check the progress and prove your efforts.

These three kinds of information are collected in GPS odometer, which can be easily counted and shared through APP such Strava.

The make up for GPS odometer and Good Choice for Indoor Cycling

Because both mobile phones and GPS computer use GPS positioning to determine speed, their accuracy is interfered by sampling density and algorithms. In the case of weak or no signal, the speed sensor will effectively compensate for the accuracy of the data, which is a good supplement to the GPS code table.

Features For M1

- 2.9inch super big ANST screen
- Automatically light the backlight
- Switzerland Ublox chip, faster positioning and accuracy track record
- ANT+ Peripheral supported: heart rate monitor, cadence sensor, powermeter
- Real time data showing:max/current/average speed, cadence, heart rate, power,gradient; Time, distance, ascent, ODO, altitude, temperature
- Support app data analysis and sync to Strava
- 1100mAh rechargeable battery, 30+ hours super long endurance
- 200h huge memory
- Built-in barometer, thermometer
- IPX6 waterproof
- Anti-theft screw holes design

Compatible with heart rate monitor, cadence sensor,power meter, such as Wahoo and Garmin.

CYCPLUS M1 GPS computer with Bluetooth and ANT + support for adding speed / cadence sensor and heart rate monitor, support upload to mobile APP;

If you are a cycling enthusiast or planning to join the sport, then you must know the importance of tracking your workouts to keep yourself motivated. This is where CYCPLUS M1 comes in.

Record 15 types of data

Current/AVG/MAX SPEED
Current/AVG/MAX Heart rate
Current/AVG/MAX CADENCE
Elapsed Time/ Altitude/ CLOCK
Track Distance/SLOPE/Total Distance

Support XOSS app, upload to Strava and Training PEAKS.

IPX6 waterproof

With IPX6 technology, M1 is waterproof so that you can enjoy the cycling experience in all weather conditions.

Automatic backlight

Inside the package, you’ll find the M1 Cycling Computer together with other accessories including rubber bands, rubber gasket, bike computer mount and a USB cable.

Installation of K1 Bracket

1. More stable than F bracket
2.Compatible with Gopro camera, Bike front light

C1 Cadence and Speed dual sensor

Production details:
1. Dual Transmission System (ANT+ / Bluetooth) Compatible With Both Widely Used ANT+ and Bluetooth Smart Devices!
2. Easy-to-install, Weatherproof, Lightweight, Wireless & No Magnet
3. Speed & Cadence 2 in 1 Sensor (If need track Speed & Cadence at the same time, you need to buy 2 units)

Powerful compatibility

Compatible with ANT+ device, such as
GARMIN Watch /Bike Computer
Bryton / IGPSORT
ZWIFT / ONELAP / X-Fitness
TOMTOM / BKOOL / Polar Beat
TACX & VIRTUAL CYCLING TRAINNING SPFTWARE

Also compatible with APP by Bluetooth such as
STRAVA /NIKE+
WAHOO FITNESS /ENDOMONDO
RUNTASTICPRO / MOOFIT
SPORT TRACKER / RUNKEEPER
SUUNTO BLUETOOTH WATCHES

IP67 Waterproof

Simultaneously record data on multiple devices with this cadence/speed sensor. Data transmits in 3 seconds to keep you informed while riding. Track all your rides with the 400-500h battery life. IP67 rating makes this sensor water and dust-proof.

Use the NEWBOLER C1 sensor to accurately track cycling cadence or speed in real-time. Connects to your ANT+ & Bluetooth 4.0 devices to provide key data in your favorite cycling apps. Check out the manual for helpful setup tips.

How to switch the Speed to Cadence mode

Lightweight design Installs easily on your bike's crank arm or wheel hub with the included rubber-elastic rings. Connect the sensor to the crank arm for cadence tracking, or to the wheel hub for speed measurements. Note: Sensor can't be installed on the wheel of spin bikes, so speed tracking is not compatible with spinning bikes.

Sensor can be used as a cadence or speed sensor. Just reinsert the battery to quicky changes modes. The Red light means speed mode, and the Blue indicates cadence tracking. Want to track both at once? Grab a 2 pack and record both cadence and speed.

Package List

1 × CR2032 Battery
1 × Sensor
2 × Pads
9 × Rubber Elastic Ring
1 × User Manuals

H1 NEWBOLER Heart Rate Sensor

1. Long battery life
2. ANT+ & Bluetooth 4.0 support
3. Compatible with garmin , igpsport, ZWIFT , WAHOO , STRAVA and so on

Powerful compatibility

Compatible with ANT+ device, such as
GARMIN Watch /Bike Computer
Bryton / IGPSORT
ZWIFT / ONELAP / X-Fitness
TOMTOM / BKOOL / Polar Beat
TACX & VIRTUAL CYCLING TRAINNING SPFTWARE

Also compatible with APP by Bluetooth such as
STRAVA /NIKE+
WAHOO FITNESS /ENDOMONDO
RUNTASTICPRO / MOOFIT
SPORT TRACKER / RUNKEEPER
SUUNTO BLUETOOTH WATCHES

Broad Compatibility

Works real-time with both smartphones & GPS devices compatible with Bluetooth and ANT+. Fits all athletes with adjustable strap from 64-107 cm (25" to 42").

IP67 Waterproof

Pro Durability: With full IPX67 water & sweat proof design, the NEWBOLER Chest Heart Rate Monitor has been battle tested by professional cyclists, runners, triathletes & fitness competitors. *note: While waterproof rated for full submersion, we do NOT recommend swimming in this heart rate monitor.

Heart rate monitor specification

Product Shows

How to Use

Please Note the L means left side, R means right side.
Pleasewet the electrode area of the chest strap with a few drops of water.

Adjust the sensor to the center of the heart with the NEWBOLER logo facing up and make sure the electrode is close to the skin

Package List

1× CR2032 Battery
1× Heart Rate sensor
1× Adjustable elastic strap

Heart Rate Belt VS Heart Rate Straps

USB Rechargeable VS CR2032 battery
Light indicator VS no light indicator
Memory: save 7 days calories and pedometer data
More comfortable, No need to get it wet
no need to wear it over my ches
Pretty light 18.7g VS 48.4g
Battery life , up to 60 Hours VS 1000 Hours straps

NEWBOER B1 Heart Rate Monitor Wrist Band Arm Belt Bluetooth 5.0 ANT Cycling Accessories Sensor for Wahoo Zwift GPS Bike Computer

-60hrs endurance time
-IPX6 waterproof
-BT5.0 and ANT+
-5V Magnetic charging
-1.5 Hours charging time

Athlete Tested Reliability

Tested by endurance athletes for class leading ANT+ Heart Rate Monitor connectivity with dual-band Bluetooth 4.0 & ANT+ protocol. Powr Labs Arm band Heart Rate Monitors & forearm heart rate monitor are absurdly reliable.

Friendly app management

Multi connection Solutions

Powerful compatibility

Compatible with ANT+ device, such as
GARMIN Watch /Bike Computer
Bryton / IGPSORT
ZWIFT / ONELAP / X-Fitness
TOMTOM / BKOOL / Polar Beat
TACX & VIRTUAL CYCLING TRAINNING SPFTWARE

Also compatible with APP by Bluetooth such as
STRAVA /NIKE+
WAHOO FITNESS /ENDOMONDO
RUNTASTICPRO / MOOFIT
SPORT TRACKER / RUNKEEPER
SUUNTO BLUETOOTH WATCHES

Wireless Charging, Long Battery Life & Waterproof

Our wristband heart rate monitor arm band is IPX67 sweat & water-proof & maintains up to 60 hour battery life. Recharging of the heart monitor battery is easy with the included wireless dock.

Light Indicator

Please note that you will need to pair this HRM to an external App.. To pair, press the logo button on the unit while it is attached to your arm. Green indicates paired; purple indicates not paired; red indicates low battery. Apps we recommend: Polar Beat, Wahoo, Peloton, iCardio, Garmin, Polar Beat, Zwift, Runtastic.

We also recommend "forgetting" the heart rate monitor from your phone's bluetooth if you have issues pairing. Reach out if you have any issues!