Item specifics
-
Brand Name
PQY
-
Origin
CN(Origin)
-
Item Height
0.063inch
-
Item Weight
0.5kg
-
Item Diameter
2inch
-
Motobike Make
Universal
-
Material Type
glass fiber/Titanium Lava Fiber
-
External Testing Certification
ISO9000
-
Item Length
5inch
-
Special Features
0
-
Item Width
2inch
-
Model Name
1805
-
ITEM NAME
Thermal Wrap
-
COLOR
black
white
Titanium
-
MATERIAL
glass fiber/Titanium Lava Fiber
-
CUSTOMERIZED
YES
-
FIT FOR
UNIVERSAL
-
PART NO.
5 meters / 10 meters / 15meters
-
WEIGHT
0.5KGS
-
KEYWORD1
Thermal Wrap
-
KEYWORD2
Thermal Wrap
-
KEYWORD3
Thermal Wrap
47760 Exhaust Heat Wrap 
2"/5CM 5/10/15M Black/Titanium Exhaust Header Pipe Heat Wrap Tape with 4/6 Locking Ties Thermal Protection Roll Shield For Motorcycle Auto Application: - Universal(For Header, Turbo manifold, Downpipe, Motorcycle piping).
Vehicle compatibility charts are for REFERENCE ONLY. Check your vehicle with OEM below to match your needs. Specification: - 100% quality assurance tested, more responsive, less expensive, easier to install.
- Withstand direct heat up to 932°F(500°C). And fade when it gets above 572°F(300°C).
- Pre-wetting roll not necessary for wrapping.
- Optimizes horsepower, performance and fuel economy.
- Reduces underhood temperatures and maintains high exhaust gas velocity.
Material & Color: - Width (in): 2''
- Length (m): 5 meters / 10 meters / 15meters
- Thickness (in): 0.063''
- Material: made of high quality Fiber glass/Titanium Lava Fiber.
- Color: as picture.
Package Included: - 1x Heat Wrap;
- 4x 200mm Locking Tie(5M);
- 4x 300mm Locking Tie(10M);
- 6x 300mm Locking Tie(15M).(100% Brand New Never Used Or Installed)
Installation: - 1. Fold 3/4” at the edge of the exhaust wrap, tuck the 3/4” fold under the exhaust wrap, and place on the pipe. This reduces fraying on the end of the wrap.
- 2. Make one full initial wrap around the pipe, roughly around pipe 3 to 4 more times, secure wrap at flange with locking tie.
- 3. After securing end, continue to wrap around pipe, using 1/4” overlap with each pass, and keeping tension on the exhaust wrap.
- 4. If primary tubes become so close together, wrap multiple pipes as one. If bend less than 90°, add approximately 8” of wrap; if bend greater than 90°, add approximately 14” of wrap. And maintain the same 1/4” overlap.
- 5. On the final pass around the pipe, fold over about 3/4” of the wrap, and tuck it underneath itself. Then secure the last coil of wrap with locking tie.
Note: - Provide Tracking Number With Every Order, Please Buy With Confidence!
- No installation guides are included, we highly recommend to seek professional installation. Any damage during installation will not be refunded.
- Will come with everything you see in the picture. Please allow difference due to manual measurement.
- Please check that the picture matches before purchase. The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding.
- For any inquiries or special requests such as larger amount ordering please write to us.
|
eBike Accessories
Motorcycle Parts