Description:
Type: car fault diagnosis instrument
Hardware version: V1.5
Voltage: 12V
Working temperature: 0~40℃
Special function: turn on the hidden attributes of the car
Support detection system: Android, windows

Features:
1. ELM327 V1.5 Bluetooth Version: With Bluetooth
2. Bluetooth and Switch (With CD)  Version: HS CAN/ MS CAN Switch + No FTDI chip + PIC18F25K80 chip.
3. USB and Switch Version: HS CAN/ MS CAN switch + CH340 + 25K80 chip.

It Can Do The Follwing:
1. Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
2. Clear trouble codes and turn off the MIL ("Check Engine" light)
3. Display current sensor data, including:
4. Engine RPM
5. Calculated Load Value
6. Coolant Temperature
7. Fuel System Status
8. Vehicle Speed
9. Short Term Fuel Trim
10. Long Term Fuel Trim
11. Intake Manifold Pressure
12. Timing Advance
13. Intake Air Temperature
14. Air Flow Rate
15. Absolute Throttle Position
16. Oxygen Sensor Voltages / Associated Short Term Fuel Trims
17. Fuel System Status
18. Fuel Pressure

Modified ELM327:
Please note that for many F.o.r.d and Mazda models (approximately since 2003-2004) are equipped with MS CAN bus, in addition to the regular HS CAN bus.
In contrast to HS CAN bus, MS CAN bus is not supported by the stock ELM327, because MS CAN is a manufacturer-specific solution and located on non-OBD2 pins.
This ELM327 has been modified to allow it to implement the MS CAN bus.
ELM327 supports HS CAN from the stock, Because for F.o.r.d HS CAN completely matches to the OBD2 standards, It occupies pins 6 and 14, MS CAN bus occupies pins 3 and 11.

Supported Vehicles:
All for For-d, for Ma-zda, for Lin-coln, for Mercury vehicles that can be addressed using an ELM via an OBDII connector.

Package Included:
1x Bluetooth V1.5 Elm327 obd2 scanner