LCD Display 48v60V72v for Electric Bike Scooter Tricycle Battery Level Turning Light Indicator Speedometer SKATEBOARD Instrument

1. this price is for display ONLY, donot include install mount and windshielding,

it is LCD display for electric scooter, electric bicycle, SKATEBOARD, electric motorcycle, tricycle , MTB with lithium battery and motor , pedal motorcycle and so on. fit for all brushless motor as long as you can fix it on your vehicle.

2 different models

2.THIS has many different VERSION,
the function is the same
only slightly different for indication , sign, and shell,
we will send any , unless u left message to designate it.

default setting with one big white connector only
no 3speed connector.
3speed and hallsensor wire ,or yxt wire, all need made to order, please left message in remarks,

3. main function :indicate

speed,
battery level grid icon,
voltage in digital,
trip,
frontlight.
ODO.
turning light left and right.
temperature(indicated alternatively with voltage)
tiny black wires are for temperature

usually error code will not be indicated, that need made to order,. need quantity order,(need your controller read yxt signal,.)
3 gears can be indicated if your controller has 3speed wire,, but need leave message in remarks in advance,.
default setting no 3 gears wires

low voltage shine:
for 48v battery as an example, when reach to low voltage 42+/-0.5v, the battery icon will shine , alarm you to charge for battery.

and when reach to top voltage such as 49v, the battery will be full.
usually for 72v, undervoltage proteciton is 62/63v
for 48v , low voltage protection 41v,
60v , low voltage protection is 52v,
the tolerance is +/-0.5v

4.size

4.shell size15.5*8.5 cm *3 (donot include scew )
display screen 12.2*5.3cm.
for new or old, the size is still the same,

5.WIRING

MAINLY
IT HAS A BIG WHITE CONNECTOR 6 holes with WIRES LIKE THIS BELLOW,
RED-power POSITIVE
green/black-power negative
blue-frontlight
purple-PHASE wire voltage speed
orange -left turning signal
light blue-right turning signal

that two long black wire is voltage choosing wire, connected 60v such as, unconnected 48v. customer can have a try,

single wire --yellow or red blackfor hallsensor, or yxt,
default setting this display takes phase voltage wire signal,

if especially need hall sensor wire signal please tell us in advance .we need preconnect the wire.

you can choose only one piece of wire for speed reading for each controller,

speed adjust,

if u connect with controller rightly,phase wire speed, --not very accurate.

the max speed is 40-45km/h at max for default setting, you can adjust it if you need by a potentionmeter back of the display , (you need open this display shell). or please leave message in advance we will make it for you before sending out.

when adjust, please use a tiny thing to twist the potentionmeter, do it softly please, donot make a whole cycle. twist little clockwise or anti clockwise will be ok.

if u want very accurate, need made to order, that available only for quantity order,.

install mount and wind shielding

8. if need install mount, or windshielding order here bellow

https://www.ebikpro.com/item/4001271890079.html?

9. match with controller

9-1.match with controller which is square wave or sinewave which read phase wire speed, and has one single display or speedometer /instrument wire on it,

like this bellow
https://www.ebikpro.com/item/32951614735.html?
https://www.ebikpro.com/item/4000761856627.html?
https://www.ebikpro.com/item/4001276168593.html?
9-2--for controller such as sabvton or others which read hallsensor signal , u need connect with hallsensor of controller or motor to read speed
9-3 --for controller such as votol. need connect with yxt signal to read speed
9-4
for this display and controller bellow , u canot use this display
https://www.ebikpro.com/item/32949345560.html?

10. see customer installed