Item specifics
-
Certification
CE
-
Origin
CN(Origin)
-
Special Features
Chip Turning Programmer
-
Language
English
-
Software Update
Yes
-
Hardware Version
V1.95
-
Item Type
Code Readers & Scan Tools
-
Item name
K-T-MFLASH V1.95 PowerBox
-
Color
As shown
-
Support Vehicle
For DQ250 DQ200 VL381 VL300 DQ500 DL501 Read & Write
-
Auto scanner color
Chip Turning Programmer
-
Function 1
ECU Programmer
-
Function 2
V1.95
-
Feature 1
ECU Chip Tuning Tool
-
Support
High Quality
-
Fit
for Hitachi FLASH Via j2534
-
Suit
High Quality
-
Fit for
OBD2 Scanner
-
Suit for
ECU Programmer Connector Cable
-
Special
Diagnostic Scanner
The tool is designed for connecting an ECU to a J2534 device and provides manual or automatic control of the unit power and shaping of the following signals: RESET, BOOT, CNF1, GPT1, GPT2, WATCDOGPowerBox for PCMFlashIt is compatible in the automatic mode with the loading programs which use:• BOOT-OEM12, 12 pin OBD-II;• L-LINE, 15 pin OBD-II.The tool has built-in current limiting resistors on the following signal lines:• RESET — 510 Ω;• BOOT — 510 Ω;• CNF1 — 220 Ω.The tool is fitted with multipurpose connectors which allow to establish the connections flexibly:• USB, designed for connecting to the computer. It is to be connected when the built-in USB — UART converter is enabled; for PowerBox software update; while reprogramming Renesas CPUs;• DC, designed for powering the built-in circuit as well as the connected ECU. It is recommended to use only quality units with 12V output voltage. While reading the password, when it is impossible in the vehicle, one must note that high-voltage converters in ECUs consume rather high current at the start which can trigger protection mechanism or even result in the power unit damage;• J2534 (OBD-II-F), designed for connecting the same name interface to OBD-II;• DB-15, designed for connecting to the main ECU connector. It is recommended to use 14P600KT02, 14P600KT03 cables or analogous ones;• IDC-26, designed for connecting directly to the ECU board or via the adapter to the special head. It is recommended to use 14P600KT06 cable or an analogous one for Tricore GPT.It is recommended to use Flash Development Toolkit software for flashing Renesas CPUs.Controls:The tool has 3 switches for operating in different modes.• «POWER», power control. The tool has three modes of power supply to the ECU: OFF allows to remove all power and control signals from IDC-26 and DB-15 connectors; MANUAL supplies power to VECU and VKEY terminals and to the control outputs depending on the chosen tactics; AUTO, automatic control, in this mode power is controlled by the loading program with L-Line signal (15 pin OBD-II).• «BOOT», simultaneous control of BOOT, RESET and CNF1 signals (3.3V): OFF, allows to remove all control signals from DB-15 connector; MANUAL pulls RESET and BOOT to the signal minus, and CNF1 to +3.3V; AUTO, automatic control, in this mode BOOT, RESET and CNF1 signals are simultaneously controlled by the loading program (12 pin OBD-II, OEM12).• «GPT», for Renesas and Tricore with GPT CPUs. It is necessary to use 5V while working with SH705x CPUs, in other cases 3.3V is to be used.Lights:• LED near the 5V/3.3V switch indicates 5V or 3.3V voltage supply.• VECU, VKEY LED indicates VECU and VKEY voltage supply.• 12V LED indicates power voltage.• BOOT LED indicates voltage on CNF1 output (the LED works both for input and output).
1pc x PowerBox for PCMFlash 1.- Please make sure your payment account is available before you bid the item. 2.- All payments should be cleared within 7 days after you receive the item. If you really have difficulty in paying, pls contact us, we will try our best to help you. 3.- If you have any special requests about the details of item, please leave a note in your order. 4.- If you want to wholesale for large quantity, pls contact us, we will give you the best price. 1.- We can ship to all over the world. 2.- The item will be sent out within 3 days after receiving the payment. 3.- Please make sure your delivery address and phone number are correct. 4.- You can track the situation of your product on website after they are shipped out. . 1.- One year guarantee. 2.- If the item is defective upon receipt, you can demand to exchange a new one within 7days from the date of receipt (Buyer should return all original and undamaged items under re-saleable condition). 3.- We supply free repairing service within one year of purchase. For the first month, we will pay one way shipping cost( from us to your location); After 1 month of purchase, the buyer need to pay two ways of shipping cost. 4.- Once we get the returned items, we will send the replaced ones back asap. 5.- Our warranty does not extend to any products that are physically damaged or under un-normal operating conditions as a result of misuse or improper installation on the parts. 1.- Your feedback is very important for our development, we sincerely invite you to leave positive feedback to us if you are satisfied with our product and service. Thanks a lot for your time. 2.- We will leave the same feedback to you after your positive feedback. 3.- Please contact us before you leave a neutral or negative feedback, we will try our best to solve the problems.
|
eBike Accessories
Motorcycle Parts