KONNWEI KW208 12V Car Battery Tester 100 to 2000CCA 12 Volts Battery Tools for the Car Quick Cranking Charging Diagnostic Tool

KONNWEI KW20812Vcar battery testeris able to effectively analyze and read important car data such as voltage, internal resistance, cold cranking amp and AH capacity,battery healthand charge status. It provides accurate results, calculates the cold cranking capability of the battery and the aging extent, allowing for a quicker, more precise car repairing.Test results display in both text and graphing, but the realtime battery voltage showing in a waveform.With an intelligent2.4” Eye protection screenand STM32 main chip, reading access is practical and rapid! Lifetime update service is supported by KONNWEI BTlink app.

Why choose KONNWEI KW208 ?

1.System voltage 12 Volts and Voltage test in waveform
2.Test Result Good, Recharge or Replace
3.Capacity Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
Internal resistance value (mΩ) and Life in percentage (%)
4.Cranking system and Charging system
5.Record and re-play battery data, Life-time free update service
6.Battery test, cranking test, charging test and other additional functions.
7.The major battery standards CA,CCA,BCL,MCA,JIS,SAE,EN,GB，DIN and IEC are supported

Easy to use battery tester

Whether the battery is in the car or not. You only need to insert the pliers in the positive and negative poles of the battery to check the battery health

Battery Testing

SOC (state of charge): refers to the state of charge of the battery, which mainly describes how much power is left in the battery;If the battery runs out, it will display 0%

SOH (state of health) :refers to the state of health of the battery, mainly describing the degree of battery aging.

Charging Test

Charging test is used to check and analyze the charging system (generator, rectifier, rectifier diode, etc.) status, displays load voltage, unloaded voltage, ripple status, charging system status, thus to find out whether the output voltage of the generator is normal, the rectifier diode works properly or not, which avoids damaging the battery and shortening its life greatly due to overcharging or incomplete charging.

Cranking Test

The cranking test is used to test and analyze the actual required cranking current and cranking voltage to check the starting motor works properly or not. The test result displays cranking time, voltage, and status. If the stating malfunction may cause an increased starting loaded torque; or rotor friction of the starting motor generates increasing friction of the starting motor itself.

KONNWEI KW208 support battery types

1.CCA:100-2000
2.BCI:100-2000
3.CA:100-2000
4.MCA:100-2000
5.JIS:26A17-24SH52
6.DIN:100-1400
8.IEC:100-1400
7.EN:100-2000
8.SAE:100-2000
9.GB:100-1400

KW208 Support Languages

English, German, French, Dutch, Russian, Spanish, Italian ,Portuguese

KW208 battery tester key functions and features:

KW208 battery tester key functions and features:

1.System voltage: 12 Volts

2.Test Result: Good, Recharge or Replace

3.Capacity - Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.

4.Internal resistance value (mΩ)

5.Life in percentage (%)

6.Cranking system

7.Charging system

8.Voltage test in waveform

9.Record and re-play battery data, Life-time free update service

10.Battery test, cranking test, charging test and other additional functions.

Konnwei KW208 12V car battery teater Specifications

1.Display: Green Color Screen

2.System Voltage:12 Volts

3.Input Voltage Range:8V-16V

4.Power Requirements: No internal batteries required.

5.Power on when hooked up during testing.

6.Operating Temperature：0℃-50℃

7.Storage Temperature：-20℃-70℃

Two Version send by random