KINGBOLEN YA100 Car OBD2 Code Reader for Check Engine Light, O2 Sensor and EVAP Test, On-Board Monitor Test Mode 6, Smog Check, OBD2 Diagnostic Scan Tool support 1996 & Newer Cars (OBDII & CAN)

KINGBOLEN YA100 Multi-Language

English, French, Italian, Japanese, Spanish, German, Russian, Simplified Chinese, Traditional Chinese

Full OBD2 Function of KINGBOLEN YA100

1. Reading Codes
Show the detailed description of the Diagnostic Trouble Code (DTCs)

2. Erasing Codes & Reset:
Turns off Check Engine Light (MIL), clears codes and resets monitors.

3. Data Stream
Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.

4. I/M Readiness Status:
Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.

5. Read Live Data Stream
Show the information of continuous data stream from a vehicle in live graphic (waveform) display.

6. View Freeze Frame Data
Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.

7. O2 Sensor Test
Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.

8. On-Board Monitor Test
Retrieves and displays test results for emission-related powertrain components and systems.

9. Read Vehicle Information
Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

10. Component Test
Certain vehicle components can be actuated by commands sent from the scanner to test their operability

Turn Off ''Check Engine'' Light:

Parts might cause your check engine light on include:

1. Gas Cap
2. Oxygen Sensor
3. Air Fuel Ratio Sensor
4. Mass Air Flow Sensor
5. Ignition Coils
6. Spark Plug Wires
7. Spark Plugs
8. Thermostat
9. EGR Valve
10. Evaporatative Emission Canister Purge Valve(EVAP)
11. Catalytic Converter

If the engine light is not turned off in time
It will cause serious environmental pollution , Increased fuel consumption,Increased engine noise.Increased in temperature, ect

Support Car Models for OBDII diagnostic function:

(Note: YA100 only Supports 12V Gasoline& Diesel, Does not support 24V Truck )

American Car: Need Standard OBD2 Protocols from 2000 to now.
for Chrysler , for Ford, for GM, For Jeep ...

European Car : Need Standard OBD2 Protocols from 2003 to now.
For Alfa romeo, for SAAB ,for Acura , for Opel , for Audi for Seat , for Peugeot , for Renault, For Bentley, for Skoda , for Daewoo , for Benz , for Daihatsu , for Land Rover , for BMW , for Vauxhall , for Citroen , for Volvo, for Fiat , for VW, for Ford , for Jaguar...

Japanese/Korean Car: Need Standard OBD2 Protocols from 2006 to now.
for KIA, for Isuzu, for Honda , for Mitsubishi, for Hyundai , for Dacia , for Lexus , for Mazda, for Nissan, for Subaru , for Suzuki, for Toyota...

Chinese Car:
Need Standard OBD2 Protocols from 2009 to now
For Great Wall, Huachen, Geely, DF Honda , Lifan, ect ...

Warning Notice

1. Even though it compatible with most cars, but different regions support the vehicle OBD2 protocol at different times, or some car is special design, so it may not compatible with some cars which do not support OBD2 protocol. Especially Japanese and Korean car brand.

2. Not Support Russian Cars before 2012, VAZ, UAZ, LADA ; Not works with 24V trucks.

for Renault, SsangYong, please contact us before purchasing.

KINGBOLEN YA100 Details

1. OBDII Connector: connect the scan tool to the vehicle's Data Link connector (DLC)
2. LCD Display: Visual display of information to the user, Backlit, 128x64 Pixel display with TFT Color Screen
3. UP Scroll Key: Moves up through menu and submenu items in menu mode. When more than one screen of data is retrieved, moves up through the current screen to the previous screens for additional data.
4. Enter Key: Confirms a selection （Or action）from a menu.
5. Down Scroll Key: Moves down through menu and submenu items in menu mode. When more than one screen of data is retrieved, moves down through the current screen to the previous screens for additional data.
6.Back Key: Cancels a selection (Or action) from a menu or returns to the menu. It is also used to exit DTC Lookup screen.

YA100 Specification

1. Display: Backlist, 128x64 pixel display with TFT color Screen
2. Operating Temperature: 0°C to 60°C (32°F to 140°F)
3. Storage Temperature: -20°C to 70°C (-4°F to 158°F)
4. External power: 8.0V to 18.0V power provided via vehicle battery
5. Dismensions: 125*65*22mm/4.9*2.6*0.9''(Length*Width*Height)
6. Net weight: 0.175kg(0.38lb), GW: 0.24kg （0.53lb）

Packing list of YA100

1PC * KINGBOLEN YA100