BM580 Car Battery Tester 6V 12V 100-2000 CCA 2AH-220AH

BM580 with 2.4 inch TFT color screen, which is mainly targeted to analyze the battery healthy status to calculate the actual cold cranking, capability of the battery and the aging extent, which provide reliable analysis evidence for the test and maintenance of the battery.
BM580 notifies the users to replace battery in advance when the battery getting aged.

Wide Range Of Applications of BM580 Car Battery Tester 6V 12V

It can test 6V/12V batteries, suitable for a variety of common models and equipment, one machine for multiple purposes.

Quadruple Protection Of BM580 Car Battery Tester 6V 12V

【Overvolatge Input Protection】Below 20V, it can be tested at will without damage the bad internal circuit board has a short circuit.
【Reversible Access】The positive and negative poles are connected incorrectly, and the device can be normal start, the device and battery are not damaged.
【Poor Contact Prompt】When the test clip does not clamp the positive and negative electrodes of the batter, the display will prompt.
【Built-in Buzzer to Remind】During the test, when the battery is in poor condition, the device will give an audible reminder.

Does your battery need to be replaced?

There are more and more on-board electrical appliances, and the requirements for battery capacity and quality are getting higher and higher. Can your battery still support it?

Multiple Functions In One BM580 Car Battery Tester 6V 12V

The four functions can be switched at will to help you quickly detect the battery status of your car.
【Battery Test】 Life / Voltage / CCA / Internal resistance
【Start The Test】Battery discharge performance
【Load Test】 Engine performance
【Charging Test】 Engine charging system

Advantages of BM580 Car Battery Tester 6V 12V 2AH-220AH:

1. In / Out Of Vehicle Tests

Prevent battery failure check battery status anytime & anywhere. the perfect backup device in your repair box.

2. Regardless Of Positive and Negative

BM580 Car Battery Teste hars a protection function, even if the positive and negative polarity is wrong, the device can start normally, and the device and battery will not be damaged.

3. Voltage Waveform Monitoring

Monitor the battery status in real time, understand the current floating size of the battery voltage, and have automatic storage and playback functions.

4. Support Multiple Battery Types

It supports a variety of battery standards around the world, can test almost all car start-up lead-acid batteries, and has a wide range of applications.
●EPS lead-acid battery;
●Car start battery;
●AGM / EFB start-stop
battery ;
●Electric vehicle battery ;
●UPS lead-acid battery ;
●Gel battery

Note: UPS battery/electric vehicle battery/motorcycle battery can only measure internal resistance/power/voltage, not battery life.

5. Low Frequency Constant Current Test

Give the battery a fixed frequency and current test signal, sample, rectify, and filter its voltage, and then calculate the internal resistance of the battery.

6. Ten Major Test Standards：GB (2AH - 220AH )

Geometry supports all current common battery standards, and a wide range of tests can meet your various needs.
●CCA (100 - 2000 )
●IEC (100 - 1400 )
●EN (100 - 2000 )
●DIN (100 - 1400 )
●CA (100 - 2000 )
●BCI (100 - 2000 )
●MCA (100 - 2000 )
●SAE (100 - 2000 )
●GB (2AH - 220AH ) Important breakthrough
●JIS (26A17 - 245H52 )

7. HD Color Screen

High-definition TFT LCD screen display, will not appear ordinary LCD lack of characters and broken strokes, etc., with backlight function.

8. Ripple Test of BM580 Car Battery Tester 6V 12V

Test the charging system of the engine, the smaller the waveform fluctuation, the more stable the voltage, indicating that the battery is in good condition.

Note: If the test result is normal, the battery is charged normally. If the voltage reading is greater than 15.0V , please check the voltage regulator; if the voltage reading is less than 13.3V, Please check the connection points, wires and engine.

9. Screenshot Function

It has a one-click screen capture function with long press "Up" and " Down" button., which is used to capture and save important data, fast and convenient.

( Note: The device can store up to 10 pictures )

10. Mini USB Interface- Free Update Lifetime

It is used for software upgrade, no need to install driver, the process is simple and easy to operate.

11. Multi-Language Available of BM580 Car Battery Tester 6V 12V

English French Russian German Italian Japanese Spanish Portuguese Polish Chinese

12. Use High Quality Wire

Selected high-quality environmentally friendly materials, good elasticity, not easy to break, tough and durable.

13. Pure Copper-plated Alligator Clip

Large opening range, strong bite force, more precise in the measurement process

BM580 Parameter Information:

Let you quickly understand the product and use it more easily!

BM580 Car Battery Tester 6V 12V 2AH-220AH Details:

Exquisite industrial manufacturing, Stylish personality.

【Non-slip Design】Conducive to one-handed operation.
【Integrated Line Machine Design】The interface is stable to prevent falling off and loss, and the wire is strong and not easy to break.
【Physical Button】 Fast response and Excellent finger feeling.
【Alligator Clip】Pure copper plating, large opening range, strong bite force.

BM580 Car Battery Tester 6V 12V 2AH-220AH Packing List:

1pc * Packaging Box
1pc * BM580 Car Battery Tester With Alligator Clip
1pc * English User Manual