Item specifics
-
Origin
CN(Origin)
-
External Testing Certification
ce
-
Hardware Version
KEYDIY KD-X2
-
Item Length
22cm
-
Software Version
KEYDIY KD-X2
-
Item Width
20cm
-
Model Name
KEYDIY KD-X2
-
Item Height
6cm
-
Power
W
-
Item Type
Auto Key Programmer
-
Item Weight
0.8kg
-
Voltage
V
-
Electronic
Yes
-
Material Type
KEYDIY KD-X2
KEYDIY KD-X2 Car Key Garage Door Remote kd x2 Generater/Chip Reader/Frequency
KEYDIY KD-X2 with 96bit 48 Transponder Copy Function
Can work with PC software by USB-B connection, and work with Android phone or tablet by OTG connection.
Three functional shortcut buttons: chip identification, remote identification and frequency detection.
KEYDIY KD-X2 Introduction:
1. Power supply: 2600mAh lithium battery; Charge method: USB 5V/1A
2. With 0.91inch OLED display screen.
3. Bluetooth BLE4.0 inside, work with mobile KD app by bluetooth connection
4. Can work with PC software by USB-B connection, and work with Android phoneor tablet by OTG connection.
5. With PS-2 interface for connecting remotes to generate.
6. Three functional shortcut buttons: chip identification, remote identification and frequency detection.
7. Basic functions as below:
1) Wired Generation.
2) Wireless Generation.
3) Mobile Phone Simulation.
4) Garage Door Generation.
5) Proximity Key Unlock.
6) Frequency Detection.
7) Infrared Detection.
8) Access Card Copy.
9) Fixed Code Remote Copy
10) Online HCS Remote Copy.
11) Online Chip Copy ( 96 bit 48chip, 46chip, 4Dchip, for Toyota chip etc. )
12) Chip Generation.
13) Chip Editing.
14) Chip Simulation.
15) lgnition Coildetection.
16) Remote Data Backup.
17) Additional Functions Will be Available in Succession.
18) Free Activation of 96 Bits 48 Transponder Copy (No token required)
How to Use KEYDIY KD-X2 to Identify Chip Type?
Put the chip you want to identify into the chip slot,then press the "Chip Identification" button.
Data Collector
KEYDIY KD Data Collector Easy to collect data from the car for KD-X2 copy chip How to use KD DATA Collector?
Prepared:KD-X2, Phone with KD APP,KD DATA Collector,Original key(No need battery), KD remotes(With battery),
Step1: Open KD APP, and connect KD DATA Collector with KD-X2.
Step2: Choose Chip Function in KD APP,and put original key into KD-X2 antena, detect and decode the original chip.
Step3: Put original key chip close to the ignition coil, and collect data by KD APP.
Step4: Put original key into KD-X2 antena, and decode it.
Step5: Choose More Function in KD APP,and put KD remote into KD-X2 antena, copy chip.
|