Color	Red white
Red white

Description
Customer Reviews(0)

Item specifics

Brand Name EAFC
Origin CN(Origin)
Interface Material Engineering Plastic
Body Material Engineering Plastic
Handle Type Finger Type
Water Spray Type Shower
With Water Pipes Yes
Water Pipes Length 5-10m
Nozzle Material Engineering Plastic
Water Range 6-7 Meters
Water Pressure 0.9M bar
Voltage 12V
Motor Speed 3100-3300 rpm
Flow 90-120L/min
Water Tube 5m

Product Description

Package includes:

Wireless Style--Package List:
1x Long gun
1x 5m Pipe
1x Connector of pipe
1x Filter of pipe
1x 6000mAh Battery
1x Charger
1x Wireless host

Wired Style--Package List:
1x Long gun
1x 5m Pipe
1x inter connector
1x Connector of pipe
1x Filter of pipe
1x 5m Cigarette lighter cable
1x Wired host

Q & A

Q1: Why does the car washing machine not start after turning on the switch?he water pressure so small?
A1: Maybe the battery is out of power, please charge

Q2: Why is there no water after turning on the car washing machine
A2: Observe whether the water pipe is bent and the water cannot be released; press the car washer for more than 15 seconds and wait for the water to be sucked into the car washer

Q3:Water leaking from multi-function nozzle,Sudden increase in water pressure

A3:The multifunction nozzle is blocked,replace the nozzle

Q4:Water flows out after the machine is turned off

A4:There is water residue in the pump door after the machine is turned off

Q5:Foam bottle can't spray ? cleaning agent

A5:Drain the water completely before storing foam bottle clogged,clean with water

Q6: It can be started, but there is little or no water from the nozzle?

A6:

①It may be that the water connector is not pressed tightly. Press the water connector directly twice for the second time until you hear a click.

②It may be that air has entered the fuselage or the water pipe. You can directly fill the fuselage with water with a tap to drain the air, and then spray water by self-priming.

Q7: Battery indicator light off?

A7:Use a screwdriver to disassemble the battery case, and press and tighten the four iron pieces at the four corners of the circuit board.

Q8: Battery charged but won't start? Product does not start?

A8:It may be because the inserts inside the machine are loose or wet. Use a screwdriver to disassemble the battery case to see if the battery circuit board is wet. If it is only a little wet, it can be air-dried. If the entire circuit board is wet, scrape off any rusted areas and air dry. If it is not wet, just clamp the corners of the battery circuit board and a few iron pieces in the middle. If you don't know how to disassemble the machine, you can try knocking the gun head down on the ground or on the table a few times.

During use, be careful not to seepage of water in the battery, it will be recharged every time it is used up, and the battery will be thrown upside down.

Warm Tips:

1.After the car wash machine is used, it should run empty for a few seconds to drain the residual water in the machine, avoid oxidizing dirt and freezing for weather reasons, and store it in a dry and cool place.

2.Do not store in the trunk of the car in hot weather to avoid fire caused by high temperature.

3.Batteries need to be kept away from water.Remove the battery after use, so as not to affect battery life.