Headlight Polisher

headlight restoration kit lets your shine and restore plastic lenses, including headlights, taillights, fog and directional lights

Polishing Kit

1* Polish Paste 85gm
1* UV Protection Liquid 3ml
2* P800 Sandpaper
2* P1200 Sandpaper
2* P2000 Sandpaper
1* Masking Tape
1* Backing Pad M10 Thread
1* Wool Polish Disc
1* White Sponge Disc
1* Adaper
1* Instruction Manual

Description

by restoring clarity to lens, the performance of the headlight is improved and the appearance of the vehicle is enhanced

now you can produce professional results with the headlight lens restoration kit

the orange sponge disc to the backer pad and apply the polish paste. Polish the lens until the shine is restored to its original condition

Sponge

4 x Sponge pads / 1 x Wool pad / 1 x Adhesive pad / 1 x M10 Drill adapter

Sandpaper

Grit: P800 P1200 P1500 P2000 P3000 P5000

headlight restoration is very good, it can make your light fresh again

How to use

Prepare: Clean the headlight lens with water. Mask off the surrounding perimeter of the lens to avoid scratching the paint of the vehicle.

Step1. Sand
Wet the sanding disc and attach it to the backer pad. Sand with three different grits to completely remove the heavy yellowing, fading, and corrosion.
Note: Use the sanding discs from coarse to fine: P800--> P1200--P2000. Not doing so will result in restoration failure
Step2. Polish
Attach. the orange sponge disc to the backer pad and apply the polish paste. Polish the lens until the shine is restored to its original condition.
Note: For best results, use an electric buffer or polisher. If polishing by hand, polish with no less than 200 strokes in a circular, clockwise motion.
Step3.Protect
Clean the headlight lens and make sure the lens is dry before the protection step. Use the white sponge disc provided in the kit. Evenly apply the protect liquid on the surface of the lens. After apply it, stay for 10-15mins to let the liquid flow evenly itself. Then dry it direct sunlight immediately (1 to 2 hours is suggested). if not, dust and other dirt will adhere to protect liquid due to its viscosity, which will affect the brightness of the headlight.

Note: Please must avoid any sunlight when apply the protect liquid on headlight (very important). After step 3, keep the lens dry. Do not wash the car for 24 hours

Feedback

Shipping

1. Shipping time: shipping within 3 days except Saturday and holidays, shipping time about 15-60 working days.
2. Tracking number will be provided and check online about 1-3 business days.
3. We hope you receive timely, but it's an international delivery, shipping time is highly depended on courier company and local Customs Duty which out of our control. Any problem, please contact us, we will help you to solve it.