Item specifics
-
Brand Name
Fireyouracing
-
Origin
CN(Origin)
-
Item Type
Ropes & Cables
-
Item Weight
0.5kg
-
Special Features
clutch master cylinder
-
Item Width
0inch
-
External Testing Certification
BQB
-
Model Name
Foot Pump
-
Item Diameter
0inch
-
Item Height
0inch
-
Year
universal
-
Item Length
0inch
-
Material Type
alumimun
-
color
red
black
silver
gold
-
piston
diameter 14mm
length 23mm
Material: Alumimun with CNC processingPiston: Diameter 14mm. length 23mmPackage: 1 pcs * Pump ; 1 set * extra extension parts; 1 set * M12 Banjo BoltsWorking Length:It will have 3 working length as like below list:1. When the piston is fully pushed to the right. The measured size of the product is about 130mm.2. When the piston is fully pushed to the left. The measured size of the product is about 153mm.3. When the piston is fully pushed to the left and the extension rod is added. The measured size of the product is about 180mm. Note before your using it:Pump under the head of the anchor head is silking, can a wide range of length ofthe distance, adjust position according to the model, using thread tighten glue,prevent loose change position. Some vehicles anchor head is U plate (Suzukiking GS125 machine, for example), as long as take U plate, installs to the pumphead endFixed long screw pump under as m10x1.25 standard, and the adjustable range is long,suitable for most models modified line of clutch and brake line, but some models(such as Suzuki king GS125 machine) of the original car pull head fixed positionis silking, need to use 8.2 mm drill bit, removing silking to installInstallation method1 First will fill the brake oil pump under lie flat, do not have air, silk mouth is verybig, can be seen there was a bubble2 See above screw, tubing with good twist screws, do not tighten, request screwside holes can be exposed3 This is the key, be sure to look good. Link on the pump and tubing, and highup, the oil pump oil cup, and then pressure several times at random (10) handle,OK now just waiting for (don't allow any action) 5-10 minutes later, in the aboveside didn't tighten the screw hole will see the brake oil flow out, then lock screw,exhaust4 Hydraulic clutch exhaust complete inspection methods: push the pump underthe wire to the pump body en croute, hand pinch on the pump handle, handle tipto move about 3 cm, knead not bottom go to, is correct. (press the handle untilthe pressure not bottom go to, there are about 3 cm distance handlebar, itfinished the exhaust, but loading debugging), loading, must pull wire all out, againunder the fixed pump, (make sure to loosen the clutch handle, wire all stretchedout)
Please note thatyou may find oil at product or package when you open the package as like below photo. The reason is that, before each product shipping out, we will do bleeding DOT oil for seal testing to keep 100% no problem for customer.
1.Delivery Time is referred as below: Country | Approx. Delivery time | United States | 8-15 working days | United Kingdom / Australia | 10-21 working days | Canada /Europe / Russia | Normally, 14-21 working days, but sometimes it takes up to 30 days due to the Custom Inspection. | South Asia / Middle East | Normally, 14-21 working days, but sometimes it takes up to 30 days due to the Custom Inspection. | Brazil / South America | Normally, 14-28 working days, but sometimes it takes up to 45 days due to the Custom Inspection. |
2. We'll ship it out within in 1 or 2 days after |