|
Item specifics
Product Description
You are buying on 100% Brand New of:
EPMAN 2" 52mm 10 Color LED Indicator Digital Display Car Turbo Boost Water Oil Temp/Press Volt Tach EXT Exhaust Gas Temp Meter Features: -2" (52mm) diameter gauge. -Black dial face when ignition is off. -10 colors backlights can be selected, and it can memory the setting in the both daytime and night mode. -Brightness can be selected in 6 different levels, and it can memory the setting in the both daytime and night mode. -3 buzzer types can be selected (slowly →fast→all the time). -4 buzzer levels can be selected. (silence →resounding) -5 Varations open ceremonies can be selected. -A warning value (arbitrary) can be set and the warning buzzer can be selected from three variations or turn off. -Data obtained during driving (top value and warning value) can be stored up, and the top value can be reviewed and cleared. -Flat glass,high-definition scale and long,narrow pointer provides accurate indication and high visibility. -Brushless stepping motor is used to enable a smooth, instantaneous response to high performance sport driving. Common Button Operation: 1.There is a button in the backside of the gauge.They are used to review and clear top value,change the colors, adjust the brightness, choose the buzzer, set the warning etc. 2.Short press to switch between different functions settings,long press until buzzer sounds, then enter the setting mode.It will return to normal status when the button is released after 5 seconds. Power Wires Connecting : White wire : To 12V wire when ignition on Red wire :To 12V battery wire Yellow wire : To 12V wire when small lamp on Black wire : To ground Specification: Model Number: EPXX701/EPXX702/EPXX703/EPXX704/EPXX705/EPXX706/EPXX707/EPXX708/EPXX709 Material: Aluminum Housing Color: Silver Face Color: Black Bezel :Chrome Voltage: 12V Diameter Size: 2" (52mm) Style: Red Needle Readout 9 Different Types Gauges
Note:
● The product is designed for use on 12v vehicles.Do not install this product on vehicles with 24v systems.
● Do not perform installation of this product immediately after the engine has been switched off. The engine and exhaust system are extremely hot at this time and can cause burns if touched.
● The LED color display of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding.
● Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)
● Instructions Is Included.Professional Installation Is Highly Recommended!!If you want to know how to use or install it,please contact us by Email.We will provide help as much as possible.
All items are Brand New unless stated otherwise on the listing. We sell DIY (Do It Yourself) Items with a few exceptions. We take no responsibility in teaching you how to install. Professional installation is strongly recommended. |
eBike Accessories
Motorcycle Parts