High Quality V1.5 PIC18F25K80 Bluetooth ELM327 OBD2 Car Diagnostic Tool Check & Remove Engine errors

Bluetooth ELM327 support android system only. If you use iphone, please buy wifi ELM327.

ELM327 The First Choice for Millions of DIY Car Owners

Read, Analyze and Clear Vehicle Engine Fault Codes without a mechanic

• OBD2 Scanner ELM327 V1.5 PIC18F25K80.
• Multi-language support.
• Read/reset 12V Vehicle engine system fault codes.
• Bluetooth-compatible for Android and Windows.
• View 14 engine parameters in real time.
• ATAL/ATPPS command and 9 OBD2 Standard protocols compatible.

PIC18F25K80 chip works with ATAL/ATPPS Commands and 9 OBD2 Protocols

* Powerful internal components read and interpret data from SAE and CAN systems. See 'Specifications' for a full list.
* ELM327 V1.5 with Single Board is the more Advanced than V 2.1 or 2 boards Type.
* ELM327 1.5 has a more stable connection and quality.

ELM327 V1.5 can read Standard OBD2 Protocols:

1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)

3. ISO9141-2 (5 baud init, 10.4Kbaud)
4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29bit ID, 250 Kbaud)
A. SAE J1939 CAN (29bit ID, 250*Kbaud)
B. USER1 CAN (11*bit ID, 125*Kbaud)
C. USER2 CAN (11*bit ID, 50*kbaud)
* default settings (user adjustable)

This Elm327 usually can work on most new car with OBD 16 pin Adapter and 12V engine:

For USA Car brand, after 1996;
For Europe Car brand (petrol), after 2001;
For Europe Car brand (diesel), after 2004;
For Japan/Korea Car brand, after 2008;
For Chinese Car brand, after 2009;
For Russian Car brand, after 2011;

If your vehicle does not fall into any of the above categories, look under the hood and try to locate a label that explicitly states that the vehicle was designed to comply with OBD-2 legislation.

In this case, OBD2 is used as a general term and can mean any of the following:

OBD II (California ARB)
EOBD (European OBD)
JOBD (Japanese OBD)

You can also consult your vehicle’s owner’s manual and perhaps contact your local dealer. However, be aware of the fact that many dealers do not know the difference between OBD and OBD2. If the vehicle is not OBD2 compliant, you cannot use a generic OBD2 scan tool such as ElmScan to obtain diagnostic information from your vehicle.

But my car has the 16-pin OBD connector, shouldn’t it be OBD2 compliant?

No, not necessarily. A lot of European and Asian manufacturers equipped their vehicles with D-shaped 16-pin connectors long before they began installing OBD2 systems on those vehicles. One curious thing to note here is the fact that most non-EOBD compliant vehicles had a DLC that does not fully conform to SAE J1979.

Phone requirements:

Bluetooth elm327 supports android system only, does not support IOS system. If you have a iphone, please buy wifi ELM327.

Features:

* Firmware Version V1.5 (Supports more protocols SAE J1850 than V2.1)

* With chip: PIC18F25K80, supports all elm327 fucntions, in program ELM327 identifier, it shows full functions.

* It understand commands such as ATPPS and other.

* The newly developed high-quality wireless scan tool, support OBD2 protocols.

* Work with all OBD2 compliant vehicles.

* Enable to read diagnostic trouble codes.

* Small bluetooth interface with a 16 pin socket.

* Support different kinds of devices to use this scan tool: Android system phones, Symbian system phones, Windows XP and WIN7 32bite computers.

* With a switch to turn on/ off these indicator lights.

Wirelessly analyze 14 more engine parameters in real time

Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).

Display current sensor data, including:
1. Engine Lights Check&Remove
2. Calculated Load Value
3. Coolant Temperature
4. Fuel System Status
5. Vehicle Speed
6. Short Term Fuel Trim
7. Long Term Fuel Trim
8. Intake Manifold Pressure
9. Timing Advance
10. Intake Air Temperature
11. Air Flow Rate
12. Absolute Throttle Position
13. Oxygen sensor voltages/associated short term fuel trims
14. Fuel System status
15. Fuel Pressure

Packing list:

1 * ELM327 OBD2 bluetooth diagnostic interface
1 * CD (KINGBOLEN A/KINGBOLEN B ELM327 no CD)

Please note:

If the disk you received is damaged, it is caused during transportation.
Please download the program through the following link, the content of the link is the same as the disk. Thank you.

http://www.360diag.net/a/downloads/OBD2_Fault_Code_Scanner/2015/0205/301.html

How to get the suitable APP software ?

pls Scan QR CODE here ,and then pls choose the right app for your phone system.

How to connect:

Android

1. Open "Settings" on your Android device and search under Bluetooth for "ELM327: OBDll".
2. Input password 1234.
3. Open your Torque app, go to Settings, OBD2 Adapter Settings, Connection Type, Bluetooth, back, then choose
Bluetooth Device, OBDII [AA:BB:CC:11:22:33].
4. You can then view and change settings and vehicle options.

FAQ: