ELM 327 V1.5 USB FORScan For Ford  Car Diagnostic PIC18F25K80 FTDI/CH340 ELM327 V1.5 HS CAN/MS CAN OBD 2 OBD2 Scanner Auto Tool

Note:

HS MS USB V1.5: ELM327 USB V1.5 version With PIC18F25K80 chip,CH340/FT232RL, 2 chip version can choose ,and HS-CAN/M-S CAN Switch(with CD)

（Many customers use HS-COM/MS-COM V1.5 ELM327 for Ford with FORScan）

CH340 Style 1:

CH340 Style 2:

FTDI FT232RL Style 1:

FTDI FT232RL Style 2:

Description for ELM327 USB Diagnostic Cable With Switch

Top 4 Reasons to Get Plastic USB ELM327:

1: Latest ELM327 includes PIC25K80 and CH340T / FTDI FT232RL.

2: Manufactured modification to include a switch to connect to different CAN buses, MS CAN bus and HS CAN bus.

3: Designed for FORScan software, compatible with software venders; for FORScan, for Elmconfig, for FF2 and for FoCCCus, plus more.

4: Support Windows XP and WIN7 32bite.

OBDII Protocols:

SAE J1850 PWM (41.6Kbaud)

SAE J1850 VPW (10.4Kbaud)

ISO9141-2 (5 baud init, 10.4Kbaud)

ISO14230-4 KWP (5 baud init, 10.4 Kbaud)

ISO14230-4 KWP (fast init, 10.4 Kbaud)

ISO15765-4 CAN (11bit ID, 500 Kbaud)

ISO15765-4 CAN (29bit ID, 500 Kbaud)

ISO15765-4 CAN (11bit ID, 250 Kbaud)

ISO15765-4 CAN (29bit ID, 250 Kbaud)

SAE J1939 CAN (29bit ID, 250*Kbaud)

CAN (11*bit ID, 125*Kbaud)

CAN (11*bit ID, 50*Kbaud)

Introduction:

With the cable and the one of the supported software vendors you can detected modules which are not visible for regular

OBD2 scanners. This includes showing you trouble codes, PIDs, running tests and services procedures which are never displayed by other OBD2 scanners and a standard ELM327

Basic Features:

Reset fault /trouble codes / parameter ids (PIDs)

Change car configuration data

Run tests

Services procedures

Program certain models

Pin Configurations:

Switch position one: HS CAN - Occupies pins 6 and 14

Switch position two: MS CAN - Occupies pins 3 and 11

Supported Software:

For FORScan

For Elmconfig

For FoCCCus

For FF2

Plus more

Please note that many models (approximately since 2003-2004) are equipped with MS CAN bus, in addition to the regular HS CAN bus. In contrast to HS CAN bus, MS CAN bus is not supported by the stock ELM327, because MS CAN is a manufacturer-specific solution and located on non-OBD2 pins. This ELM327 has been modified to allow it to implement the MS CAN bus.

ELM327 supports HS CAN from the stock, because for HS CAN completely matches to the OBD2 standards. It occupies pins 6 and 14. MS CAN bus occupies pins 3 and 11.

Packing List:

1 x ELM327 Diagnostic Interface

1 x CD