- 0Cart
-
Your shopping cart is empty.
-
more items in the cart...
Cart Total: $0.00
Proceed to Checkout
Your shopping cart is empty.
Cart Total: $0.00
Proceed to Checkout
Item specifics
Product Description
Notice: 1.This Controller work with sensored Brushless DC motor and Kunteng LCD only. This ebike controller is not suitable for scooters. 2.Work voltage:36V or 48V Universal (support both voltage) 3.Suitable for Brushless Non-gear Hub Motor 500W/350W 4.This one is Square Wave Controller. Specifications: 1.Mosfet:9 mosfet 2.Work voltage:DC 36V or 48V 3.Rated current:12A 4.Low voltage proection:DC30/40±0.5V 5.Max current:25±1A 6.Speed set: 1-4.2V 7.Size:127*67*40mm Details: -Phase cable(3pcs) connect with motor -Hall sensor wire -Battery cable(XT60) -Throttle -PAS Sensor -Speed sensor -Brake connector (2pcs) -Light connecotr 1(Output power only 3W) -Light connector 2(Output big,connect battery directly) -Electric lock -Display -Back up -Cruise 25A controller with one KT LCD 4 display 1. Dimension: 10x19x54mm. Note: How to determine the value of the parameter P5 ? The formula is LVC+P5/3.77. For 24V battery, LVC=20V, P5/3.77=1. For 36V battery, LVC=30V, P5/3.77=1.5. For 48V battery, LVC=40V, P5/3.77=2. You can adjust P5 parameter by your own battery discharge curve. 25A controller with one KT LCD 5 display 1. Dimension: 16.5x51x77mm. Note: How to determine the value of the parameter P5 ? The formula is LVC+P5/3.77. For 24V battery, LVC=20V, P5/3.77=1. For 36V battery, LVC=30V, P5/3.77=1.5. For 48V battery, LVC=40V, P5/3.77=2. You can adjust P5 parameter by your own battery discharge curve. 25A controller with one KT LCD 3 display 1. Dimension: 20x65x96mm. Note: How to determine the value of the parameter P5 ? The formula is LVC+P5/3.77. For 24V battery, LVC=20V, P5/3.77=1. For 36V battery, LVC=30V, P5/3.77=1.5. For 48V battery, LVC=40V, P5/3.77=2. You can adjust P5 parameter by your own battery discharge curve. |