note：48-64V 1000W controller electric lock is 1 wire，36V-48V 1000W controller electric lock is 2 wires.

48V-64V 1000W/ 36-48V 1000W controller can work with hall sensor/hall sensorless

Rated Voltage: 48V-64V /36V-48V
Low Voltage : 41V±0.5V/32V±0.5V
Rated Power: 1000W
Limit Current: 40A

48V-64V 1000W controller function

1. instrumentation line

（There are two instrument wires, one is suitable for pointer type instrument (green wire),

and the other is suitable for liquid crystal type instrument (purple wire),

choose wiring according to different instruments）

2. motor line

3. battery line

4. electric lock line

5. hall line

6.self-learning line

7. low brake

8. high brake line

9. 3-speed line

10.reverse line

11.throttle line<br>

12. Cruise speed line

13. Anti-theft power line

14. Anti-theft alarm line

一.connect the motor line (color to color)

二. connect the battery line(red:+ , black:-)

三. connect the controller throttle line, electric lock(must connect）

四. connect the hall line

五.docking the two self-learning lines, the wheel will forward or reverse.

(1.if wheel forward ,Separate the self-learning line.

2.if wheel reverse, Separate the self-learning line. Docking the self-learning line again

if wheel forward ,Separate the self-learning line.)

六.other functions can be connected as needed.

六.other functions can be connected as needed.

36-48V 1000W controller function:

1.self-learning

2.cruise line

3.reverse line

4.high brake

5.low brake

6.3-speed (low/middle/high)

7.throttle

8.electric lock

9.hall line

10.LCD instrument line

11.Anti-theft power supply

12.Anti-theft signal

13.battery (red battery+, black battery-)

14.motor

15.pointer meter line

一.connect the motor line (color to color，if motor without hall line, don't need connect hall line）

二. connect the battery line(red:battery + , black:battery-)

三. connect the controller throttle line to throttle, controller electric lock connect to throttle electric lock

（if throttle not have electric lock,the electric lock 2 wires of the controller can be docked together）

四.docking the two self-learning lines, the wheel will forward or reverse.

(1.if wheel forward ,Separate the self-learning line.

2.if wheel reverse, Separate the self-learning line. Docking the self-learning line again，

if wheel forward ,Separate the self-learning line.) Self-learning is to adapt to the supply voltage

五.other functions can be connected as needed.