Attention!!!

1. We have a manual for this product. If you don’t know how to use it, please contact us.        

2. The color of the box is red or blue. If you mind, please contact us first. 

3. We don't ship to the following area from our European warehouse

    *Spain: Canary Island,Balearic Islands

*France: French Polynesia, Reunion Island

*Portugal: Madeira & Azores

4. The container may have dents or cracks during transportation,but does not affect the use of   tools, please understand

Description:

100% new and High Quality

Professional tool for commercial or occasional use

Refill entire cooling system quickly

Eliminates need for bleeding and purging system to eliminate air pockets.

Universal adapter for use on most car and light truck radiators

For refilling radiators with coolant without producing air locks

Dramatically reduces cooling system refill time without mess and without introducing air-locks

Simply plug into the workshop airline, attach to the cooling system heater tank and create a vacuum

Air consumption – 12cfm fluid hose length 900mm

Specifications:

How to use

1.Cooling System Leakage Test .

1.1Removing the original radiator cap from the radiator or expansion tank.

1.2Choose the appropriate adapter from the test set and connect it to the radiator or expansion tank.

1.3Now connect the hand pump(1) to the adapter.

1.4Press the test pump until pressure of 10 to 15psi is reached CAUTION:Avoid a pressure of 35psi or more! Check the pressure gauge. If the displayed value decreases, the leakage is in the cooling system.

The cooling system has a leak, if there is pressure drop or water loss.

2.Radiator Cap Leakage Test .

2.1Remove the original radiator cap.

2.2Choose the appropriate joint 2a or 2ba and connect it to the radiator cap.

2.3Press the test pump for few times and watch the pressure gauge. The pressure falling if the cap is defective. 2.4Compare the measured pressure values with standard-pressure of radiator cap.

Attach the test adapter to quick coupler of hand pressure pump, then press the hand pressure pump few times to push remnant water out the test adapter.

Drop pneumatic oil into the air hole of the hand pump end to lubricate the piston of hand pump.

3.FILL COOLING SYSTEM

3.1Open the hood and attach a vacuum pump with hooks on the hood.

Material: ABS+ metal

Package List：

1 x Cooling System Vacuum Tool Set

1 x Storage Case