Specifications:
Material: Butyl Rubber
Diameter: 8-10 mm
Length: about 4 meters/13.1ft
Quantity: 1 pcs/2pcs

How to Use:

1. After removing the headlamp cover or windshield, the pinch weld areas should be dry, clean, free from dust, oil and grease. 2. Release the sealant from the release paper and press it sufficiently around the pinch weld for a complete contact.
3. When properly positions, the tape should be continuously attached to the pinch mold.
4. If used in cold conditions, warming the tape surface to attempting the installations as this will allowing good work ability.

Fitment:
For Car Headlights/Windshield

Package Contents:

1/2 x Rubber Sealant