Item specifics
-
Origin
CN(Origin)
-
Item Length
26.5cm
-
Interchange Part Number
NO
-
Material Type
Aluminum box + cable
-
Special Features
Upgrade reversing image or 360 degree panorama
-
Other Part Number
NO
-
Item Width
16.6cm
-
Manufacturer Part Number
NO
-
Country/Region of Manufacture
China
-
Placement on Vehicle
FRONT
-
Item Height
7cm
-
Fit for1
Volvo V60 XC60 S60 S60L
-
Fit for 2
Volvo V40 S80L
-
Applicable year
2015-2018
-
Support screen size
7 inch screen
Car rear reverse camera interface for volvo xc60 v60 s60 v40 S60L S80L adapter backup original screen display upgrade decoderInstallation instructions -If you have a manual gearbox model, please leave us a message.-Please note: When installing the manual gearbox model, the camera needs to be powered in the reversing light. After installation, the reversing screen has no dynamic track and no radar display. Functions-Upgrade reversing image or 360 panoramic
Applicable car type-Volvo V60 XC60 S60 S60L（2015-2018） -Volvo V40 S80L
Notice-This product is only suitable for 7-inch screen -Buyer Need to Leave me message of your car information for order. Car Information Requested : " Car Name + Made Year + Car Monitor Photo"
Before and after installation
Line display diagram:-TO CD host power-TO Original car power-Front canmera-DVR port-Rear camera-Rear power -DVR ACC-360 camera detection-LVDS input-LVDS outputProduct disassembly and assembly process *Note: All disassembly and assembly processes need to be powered off and protect the original car to avoid damage to the original car parts. -XC60 Asia-Pacific version of the control map (Figure 1), first pry open the air conditioning panel up and down, left and right according to the specified position with a rubber knife (Figure 2), remove the air conditioning panel harness, remove the left and right screws in accordance with the red circle (Figure 3), use a Use a screwdriver to pry off the left and right buckles, take out the decorative strip of the CD disc (Figure 4-5), take out the left and right panel fixing screws (Figure 6), and use a 90-degree screwdriver to take out the two screws at the bottom of the panel (Figure 7) Lift up and take off the panel, unplug the power harness (Figure 8), remove the fixing screws of the host in the red circle (Figure 9), transfer the product LVDS interface and square head power supply (Figure 10), check the harness, install the reversing camera After the recovery, the rear view and VGA HD 360 installation effect picture (Figure 11-12).
|
eBike Accessories
Motorcycle Parts