Descripción
Comentarios de clientes(0)

Item specifics

Brand Name Zerone
Origin CN(Origin)
Material Acrylic
Model Number Throttle Controller

Product Description

Cammus Windbooster 3‑Mode Electronic Throttle Controller RT806 Fit for Great Wall V240 2006‑2020

Feature:

1. With 3 driving modes: normal mode, econ mode and race mode. Each mode comes with 10 level adjustment, "0”= less sensitive, “9” = most sensitive. Brings +15% fuel saving and +68% power response.
2. Throttle accelerator, allows acceleration to happen faster and more aggressively. For example, as a standard, 10% of the pedal input will provide a 10% accelerator signal to the ECU. The throttle controller may send a 30% message to the ECU when you only have 10% throttle input.
3. It will immediately give 30% of the signal to the ECU instead of smoothly accelerating over time. From the driver's point of view, with this "power saving mode" enabled, your car feels faster and more responsive than before adding the controller.
4. The ultra‑thin thickness and the compact size enable it to be installed anywhere without affecting the interior design, reliable to use.
5. Plug and play, no need of external power supply (absolutely no cord cutting, no OBDII socket), special plugs for each specific car model, safer and more reliable, simple and fast to install.

Specification:

Item Type: Throttle Controller
Material: Acrylic Panel + ABS Frame
Size: Approx. 50 x 30 x 9mm/2 x 1.2 x 0.4in
Installation: Plug-n-play installation DIY tuning
3 Driving Modes: Normal, Econ, Race, Each Mode comes with 10 level adjustment, "0”= less sensitive, “9” = most sensitive.
MT/AT adjustment: YES (manual gear or automatic gear can be switched)
Part Number: RT806
Fitment: Fit for Great Wall V240 2006-2020
Installation Notes:
1. Unplug the original car electronic throttle plug-in, then plug the adapter cable into the accelerator pedal socket, and then plug the original car throttle plug-in to the adapter cable, or first plug the throttle plug into the adapter cable, and then plug the adapter cable into the throttle Pedal socket (both conditions depend on the model)
2. Stick the display on the central control where you think it is convenient to operate and watch
3. Plug the wire of the display and the adapter cable
4. Fix the wiring with cable ties.

Package List:

1 x Throttle Controller Display

1 x Adapter Harness

1 x Instruction

Please note that the new type and old type of this product will be sent randomly,and make sure you will not mind before ordering.