Product Note:Due to the light and different screen display
the picture and product maybe slightly different
Turbine Exducer Diamter55.8mm
Claims:No any proprietary rights
affiliate and sponsorship with the third party marks.
Important NoticeUniversal Turbo
So modification required on some vehicles
Compressor A/R0.5
Product Type:This is aftermarket replcement part.
Turbine Inducer Diamter64.8mm
Compressor Trim48.1
Turbine A/R0.63
Product Description
Introduction
Are you trying to put together a cost effective turbocharger system for your vehicle? You should know a turbocharged car has about 20-40% more total power than a non-turbo car of the same year, make and model. Well, Maxpeedingrods universal turbocharger got just what you're looking for. Don't hesitate to get a turbo to boost your car's power.
*Product Material 1. Turbine housing ：Ductile iron QT450-10 - temperature resistant up to 700℃ 2. Steel turbine wheel：K418 alloy - high oxidation stability and resistance up to 900℃ 3. Compressor housing：ZL104 aluminum with lightweight 4. Compressor wheel/blades：Cast aluminium blades – superior air tightness & corrosion resistance *Product Performance 1. Cost-effective turbo increase 20-40% power for your car 2. Rich experience in turbo production and own factory 3. Quality assurance 4. High-speed oil seal ring 5. Strict quality inspection 6. Improve emissions & save oil 7. Built for durability and strength *All necessary gaskets included for ease of installation
Note
* Professional Installation is Highly Recommended,Instruction is NOT Included *This is universal application turbo, so modification might be required for some vehicles * Additional parts will be needed for a complete installation. Please consult professional turbo installer for details.
Notice:
* Replace, repair or reconnect air cleaner element per manufacturer's manual to avoid compressor wheel damage.
* Make sure the oil drain line is lower than the turbo itself.
* Gasoline car must install a water cooling device to avoid overheating.
* Ensure exhaust outlet are well sealed by welding.
Technology Advantage
1. 100% balancing Test by TURBOTECHNICS VSR3
Technology Advantage
1. 100% balancing Test by TURBOTECHNICS VSR3 This Turbocharger you will receive has been balanced using the VSR machine technology. Through the comprehensive and high-precision static and dynamic balance detection technology, and reliability. 2. G3-min-Flow VNT Turbo Testing The G3-min-Flow (Air) machine can accurately measure the flow through the VGT turbo and verify that it is set to the OEM factory setting. easily adjust the critical minimum-flow stop to the correct setting before the turbocharger leaves workshop. 3. Advanced Actuator Tester/Programmer Electronic actuator diagnostic with G3-rea-master can rewrite memory in electronic actuators and also allows to modify operation range of the actuator arm, that includes changing open and close positions of the working angle.
Cost effective turbocharger give your car 20-40% power than a non-turbo car of the same year, make and model
Ductile Iron QT450-10, the material used for the exhaust housing, is temperature resistant up to 700℃
K418 Alloy, the material used for the exhaust impeller, has high oxidation resistance & stability (resistance up to 900℃)
The cast aluminium blades are great airtight seal, airflow, light weight, and corrosion resistant
eBike Accessories
Motorcycle Parts