Product Description:

The AUTOOL SDT208 Smoke Detector is designed for pipeline leak detection of vehicles' air intake system, fuel system, and cooling system.

It is suitable for all family cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats.

It is the golden partner of the car diagnostic instrument.

It can be used with the car diagnostic instrument to accurately determine the location of the physical fault of the car and

quickly detect the hidden fault of the car engine.

How to do leakage test？

1. Fill 10ml baby oil to the detector for the first time. Open the engine cover, and hang the detector in the cover. 2. Open the pipe that needs to be connected to the detector and access the adapter. 3. Connect detector with DC12V battery, turn on the power switch, and the detector starts to work 4. In about 30s, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary.

Parameters:

Input Voltage    12V/ 24V

Pressure Control     Built-in

Operation time for one test    15 min

Flow control    Built-in

Pressure maintain    2 sets

Detection Method of Fuel Evaporative Emission Control System (EVAP)

Since 1996, cars manufactured in the United States have been equipped with EVAP service ports;

in most American cars, EVAP service ports are usually located in engine compartments,

but some special models of EVAP service ports may be located in other locations.

EVAP routine detection method: open the plastic cap of the EVAP service port, then remove the one-way valve clockwise using

the valve core wrench, then install the adapter of the EVAP service port, then import smoke from this port into the EVAP system

for leakage detection.

Judgment of Leakage Condition

If the machine is equipped with pressure gauge products, you can first not to open the smoke generator switch,block the smoke outlet,

observe and confirm the pressure gauge readings, and compare the pressure gauge readings in the detection process.

If the pressure gauge readings can continue to rise and maintain rising up, this indicates that there is no leakage in the system;

if the pressure gauge readings decline, indicating that the system has leakage.

If the pressure gauge reading is zero, it means the size of the leakage point is more than 0.3 mm.

About Smoke Oil

This product can function withordinary fume oil or baby oil.The selected fume oil must be pure, non-aqueous liquid and in a fluid state.

Do not use sticky or dense smoke oil, which can easily damage the machine.

If the product failures are caused by improper use of smoke oil, this shall not be covered by the product warranty.

When adding smoke oil, please use the pointed measuringbottle.

If the oil exceeds the MAX, please open the oil outlet port and discharge the appropriate amount of fume.

Packing List:

1pcs*Smoke Pipe

1pcs*Red Pipeline Plug

1pcs*StorageBox

1pcs*Scaled Oil Bottle