Support For 99% Car Model

Support for Audi,for Australia Ford,for Benz,for BMW,for Brilliance,for Chevrolet,for Chevy,for Chrysler,for Citroen,for Dacia,for Dadi,for Daewo,for Daihatsu,for Demo,for Fiat,for Ford,for GM,for Holden,for Honda,for Hyundai,for Isuzu,for Jaguar,for Kia,for Lancia,for Land Rover,for Mahindra,for Maruti,for Mazda,for Mitsubish,for Nissan,for Opel,for Peugeot,for Porsche,for Renault,for Romeo,for Rover,for Saab,for Seat,for Skoda,for Smart,for Subaru,for Suzuki,for Tata,for Toyota,for Volvo,for VW,for Yamaha,etc.

Main Function:

1. Ultrasonic cleaning , dismantle the carbide of the injector

2 .Cleanning spark plug:Put spark plug into cleaning tank ,input clean fluid and begin clean

3. injector test.
stimulate engine runing condition, test injector in different speed range, Check and test injectors's injection situation:atomization/sprayingangle/spraying mount/spraying uniformity;

4.leakage and block test;

5.Uniquely designed various compound bonder for all kinds of side-inlet injectors;

6.With reverse flush function, to clean inside out, to improve clean efficiency;

7.With a set of adaptors to clean injectors without dismantling it from the engine;

8 Cleanning and test motorcycle injector,testing function for HONDA YAMAHA SUZUKI SANYANG injectors only, (need extra accessory and extra fee,choose by yourself)

Features:

1. LED display;
2. Ultrasonic cleaning trough built-in;
3. Tool trolley make it more conveniently to operate;
4. Equip with high quality SIEMENS pump, make it endurable;
5. Discharging fluid more quickly, add 2 value in front of machine.

Tip:

1. Warranty: 3 years Warranty.
2.CT200 Supported 110V and 220V .
3.Power cord:EU Plug and US Plug.
4.English manual & English control panel.
5. This one was for 6 cylinder car (It will fit for 2 cylinder after blocking two test tube ).
6. The machine work on petrol injector, not for diesel injector.
7. Motorcycle injector testing for HONDA for YAMAHA for SUZUKI for SANYANG only(adapter need extra fee ),customization special adapter for your motorcycle, please contact us.
8.Convert cable come with machine, please try to use the convert cable if pulse cable can not match your injector.
9.We can clean fuel system, throttle valve without disassembly via CT200 (but need additional accessories,if u need,contact me).
10.If you want to know more about product parameters and product usage, pls leave a message and tell me your email .
We have an electronic version of the manual and video tells how to operate it.

How To Work:

The CT200 Cleaning Machine
1 Clean injector's outside with gasoline or cleaning liquid before open machine
2 Putting injectors in ultrasonic bathtub after the outside of injector are free of dirt.
3 Turn on ultrasonic system,pulsed allowing the ultrasonic energy to dislodge any particles even build-up inside the injectors.
4 Fixed injectors on main machine
5 Testing injectors for resistance, shorts, and current draw
6 Performing leak test, spray pattern, and flow rate testing on flow bench.
7 The injectors are now returned to the flow bench for retesting of all functions.

Q&A

1.what liquid I can use for the test ?
Please use absolute ethanol (industrial alcohol) or other non-corrosive liquids as the detection liquid (generally the detection liquids are colorless and transparent, no irritating odor liquid)

The test liquid is used to test and judge the quality of the fuel injection nozzle. It is a colorless and transparent liquid with no irritating odor, non-corrosiveness, and not easy to emit, but used in the measuring cylinder of the fuel nozzle cleaning machine;

2.What is a cleaning agent?
The cleaning agent is used to clean the attachments (carbon deposits) on the fuel injection nozzle. It is generally highly corrosive and flammable. It should be kept away from the fire source and avoid contact with the skin when used. Use it in the ultrasonic cleaning tank of the injector cleaner;


Injector cleaning agent test liquid and cleaning agent precautions

1. It is forbidden to use corrosive liquids as fuel injection nozzle detection liquid to detect fuel injection nozzles. Corrosive liquids will damage machine seals and fuel injectors;

2. It is forbidden to use a cleaning agent instead of the detection liquid, because the cleaning agent is generally corrosive and will cause damage to equipment and injector seals;
Tips: Do not get any cleaning solvent on the outside of the vehicle, as this will damage the paint

3. It is forbidden to use gasoline instead of cleaning agent or test liquid, which is dangerous and easy to cause safety hazards;

4.Tips: Do not get any cleaning solvent on the outside of the vehicle, as this will damage the paint


Because liquid can not ship by airmail, our FUEL Injector Cleaner Tester do not contain Injector test liquid and Injector detergent, you can purchase it from your local market.
Please kindly forgive.

On the left is the test liquid (test the injectors in a glass tube),
and on the right is the cleaning liquid (use for ultrasound)

3.Can you supply the adaptor for side feed injectors? I need to be able to do both top feed and side feed?
Adaptor for Side Feed injectors Has been discontinued

4.Does it support no-dismantle clean car fuel system?(if it brings the on-vehicle adaptors,

this adaptors do not come with this CT 200, if your need purchase additional connector kit, Contact me if needed

5.Can this clean the direct injectors ?
can clean direct injectors
Not sure if it can test direct injectors
I want to see the direct injectors photo before I judge
Or you can send the pictures with measure the specifications of the gasoline Entry port, how many millimeters is the diameter?

6.why there is a hole in the ultrasound tray

hole in the ultrasound tray For recycling cleaning liquid
There Is A Faucet Switch On The Back Of The Machine.
When You Tighten The Faucet Switch, The Cleaning Fluid Will Not Flow Out

7.Does it support no-dismantle clean car fuel system?(if it brings the on-vehicle adaptors,

this adaptors do not come with this CT 200, if your need purchase additional connector kit, Contact me if needed

Answers to usage questions

1. No response at boot
Check whether the fuse on the bottom of the right side of the machine is damaged. If it is damaged, please replace the fuse (AC 250V/5A).

2. Oil leakage at the oil separator assembly
Oil leakage at the oil separator, please check whether the installed "O" ring is matched, and check whether it is deformed or damaged. If it is not matched or damaged, please replace it;The two black adjusting screws should not be too tight, too tight will also cause oil leakage of the oil separator.

3. The oil pressure drops slowly
The oil pressure cannot drop to zero within 1 to 2 minutes, and you can use the hex wrench to adjust the relief valve counterclockwise.

4. The buzzer sounds long without oil pressure
The machine has a lack of oil alarm function. When the liquid level in the oil tank is insufficient, a sound will be emitted, and the oil pump and fuel injection nozzle will be automatically turned off and returned to stop later.In the state, the prompt sound will be closed automatically after adding enough cleaning fluid. At this time, you must press the [Run] key to restart the oil pump.

5. Must be pressed 'Drain key' twice to drain test solution completely
The solenoid valve of the machine has an automatic shut-off function within 15 seconds; more liquid in the glass tube may require multiple drains.

6. The amount of cleaning and test solution added
When adding cleaning fluid, the cleaning fluid in the ultrasonic box should not exceed the connection port of the fuel injection nozzle; when adding test fluid, the testing fluid should not exceed two-thirds of the glass tube level display.

7.Problems with cleaning and testing 4 injectors
there is a short circuit of the machine, which causes the protection of the machine to restart.It may be that the resistance value of the fuel injector is too low or there is a problem with the fuel injector. You need to find the problematic nozzle and replace it with another normal nozzle for cleaning. If there is no problem with the fuel injector, one of the pulse lines is damaged. There are 6pcs impulse lines, and each impulse line needs to be tested separately. If all 6pcs pulse lines can be used normally, this is the problem of the fuel nozzle.

why have to clean injector?

When we turned off the engine suddenly, the gasoline which have been spray out can not be recycled. It would attached on the injector and combustion chamber walls. Gasoline is easy to volatile, but wax and varnish were stayed. Heat these wax and varnish day after day,they will be changed into hard coke. The hard coke will be produced more quickly and more thickly when engine work with poor quality fuel. A heavily clogged fuel injector may not allow enough cleaner to pass through during a routine cleaning to be adequately cleaned. Additional cleanings may be needed to clear heavy deposits

The hard coke lead 4 problems on injector
1. Leak
2. Blockage
3. Poor atomization
4. Uneven fuel injection
So we have to clean injector and engine system

Working Condition:

Power supply: AC220V/AC110V±10%
Frequency: 50HZ±0.5
Humidity:<85%
Environment Temperature: 10°C~40°C
Magnetic Field: <400A/m
Spark and fire is prohibited.

Specifications:

Fuel Tank Capacity: 2000 ml
Capacity of Measuring Cylinder: 125 ml
Speed Range: 0~7500 rpm
Injecting Times: 0~9900 Step: 100ms
PWM Pulse: 0~20.0 ms Step: 0.1 ms
System Pressure: 0~0.6Mpa (adjustable)
Time: 0~20 minute (adjustable)
Power of Ultrasonic Cleaning: 70W
Frequency of Ultrasonic Cleaning: 28 KHZ±0.5 KHZ
Spark and fire is prohibited.
the maximum test pressure :
8kg, 80kg/cm2 = 113.68 psi
but the machine can't always work in high pressure

Package include:

1pc X AUTOOL CT200 Petrol Car Injector Tester Main Unit
2pcs X Valve (for discharging fluid from machine tank)
6pcs X Cleaning connector
6 pcs X Sealing ring
6pcs X Washer fittings
5pcs X Plugs
1pc X Ultrasonic cleaning bracket
1pc X Ultrasonic cleaning cover
1pc X Power cable
1pc X Funnel
1pc X Oil separator
2pcs X Pulse signal cable
2pcsX Fixing bolt
1 x Manual(English)