Our guarantee：

1.100% Brand New Autel Original Genuine:
We are Authorized Distributor of Autel Brand that product authorization are guaranteed.

2.PS100 works on 12-24V Sources, not only for cars!!!

About Autel PowerScan PS100:

Autel PS100 Power Scan Kit is the most revolutionary circuit tester yet, operating at 12-24 volts. With voltmeter, test light, built-in flashlight, short circuit indicator, relay/component tester, continuity tester and ground fault indicator, the Power Scan is indeed the ultimate in performance and affordability, allowing users to check circuits in a single step.

What are the advantages of the product？

● Performs every type of service including power injection, measurement, ground testing, polarity checks, continuity testing and components activation;
● Easy to read AVOmeter allows you to read voltage, current and resistance at the fingertip;

● With a flip of the power switch, you have an instant hot/ground lead for powering up electrical components like cooling fans, relays, etc;
● Simultaneously uses the hot lead and the ground lead to activate components right in your hand;

● Instantly identifies positive, negative and open circuits;
● Tests for bad ground contacts instantly, allowing you to follow and locate shorts fast without wasting fuses;

● Instantly checks continuity of switches, relays and diodes;
● Circuit breaker protected;

● Built-in Flashlight enables you to work in the dark;
● Audio tone indicator allows for no-look menu scrolling once users are familiar with menu tone assignment;

● 20ft (extendable) cable provides excellent accessibility to test along the vehicle;
● Extremely easy to use and highly reliable;

1. Two power supply methods

PS100 Circuit tester has TWO power resources. Directly connect the AUTEL PS100 with the cigarette lighter or battery electrode, then you are ready to test. Compared with other circuit testers that only use car battery power, PS100 provides more choices and is more convenient to use.

2. Do More Functions Than Multimeter

Select the diagnostic model by depressing the mode button,and then connect the probe tip to the circuit,the LED is to display DC/AV voltage,resistance.

3.Quickly locates open or short circuit

AUTEL PS100 power probe follows and locates open or short circuit without having to move panels, molding or carpet to expose wires. No more fuses wasting.

PS100 Work Mode:

Autel PowerScan PS100 has four work modes:DC Voltage,AC Voltage,Resistance and Tone On/Off.

DC Voltage:

While the tool in this mode, contact the probe tip to a circuit, then the LCD display will read the DC voltage with a resolution of 0.1 volt.

AC Voltage:

While the tool in this mode, contact the probe tip to a circuit, then the LCD display will read the Max. voltage, the Min. voltage, frequency and duty cycle.

Resistance:

While the tool in this mode, contact the probe tip to a circuit, then the LCD display will read the resistance between the tip and auxiliary ground lead.

Tone On/Off:

While the tool in this mode, just do a quick press of the mode button to toggle the tone on or off. While quickly pressing (a quick press and release) the mode button, if a short high beep is heard, this means the audio tone is turned on. If a short low beep is heard, the audio tone is turned off.

This function is invaluable when working in bright areas where LED illumination alone is not sufficient. The audio feature may be disengaged when desired, such as for applications where the tool will be connected to circuits for long periods of time and the audio could become annoying.

Autel PowerScan PS100 Specifications:

Display: TFT color display (160 x 128 dpi)
Operating Temperature: 0 to 60°C (32 to 140°F)
External Power: 12.0 or 24.0 V power provided via vehicle battery
LengthWidthHeight: 126mm(4.96")46.5mm(1.83")35mm(1.38")
NW: 0.105kg (0.23lb),GW: 0.726 kg(1.6lb)

Package list:

1 × PowerScan PS100
1 × Rugged blow molded case
1 × 20ft. extension cable
1 × Probe tip
1 × Battery hookup clips
1 × Cigarette lighter adapter
1 × User's Manual

FAQ：

1.How to Power the PS100?

The circuit test tool is powered via the vehicle battery. Connect the RED battery clamp to the POSITIVE terminal of the vehicles battery, and the BLACK clamp to the NEGATIVE terminal. When the tool is first connected to a battery (power source), it will sound a beep and the Head Lights will be on to illuminate the test area of the probe tip.

2.Is the PowerScan Probe Tester computer and air bag safe?

The tool LED and LCD pull no more than 1 milliamp of current,therefore when using it as a test light or multimeter it is computer and airbag safe.

3.Why do I have no power at the tip when I am pressing the power switch forward but the red LED is on?

The power switch goes through a lot. It is one of the few things that go wrong with the tool. The switch is a consumable that needs to be replaced on occasion. You can buy switches from your Autel authorized tool supplier. The tool with the Rocker Switch slots makes it easy to replace a worn switch in the field without having to send it in for repair.