Specification:

Condition: 100% Brand New

Color:Red & Blue

Material:Aluminum Alloy & Nylon

Size(ID):AN 4

Length:5m / 16 ft

Working Temperature:-40℉ to 257℉(-40℃ to 125℃)

Maximum Working Pressure (psi):500 psi

Bursting Pressure(psi):2000psi

Hose Inner Diameter:0.22inch (5.56mm).

Hose Outside Diameter:0.44inch (11.18mm)

Features:

1.Produced by the sophisticated technology

2.It is the combination of elegance and good use, firmly and securely, ensureing the safety

3.Made of durable and reliable material

4.Light weight and portable, easy to carry with

5.Easy to use for its simple design

6.Brand new and high quality

Application:

The fuel line worked with coolant, fuel, diesel, oil, hydraulic fluid, pump gas, alcohol and air. NOT FIT E85. 4AN nylon braided hose can be used in brake system, fuel return system and turbo cooler system.

Package Included:

1 x 5m/16ft AN-4 Nylon Braided Hose

4 x AN-4 Straight Swivel Hose Ends

2 x AN-4 45 Degree Swivel Hose Ends

2 x AN-4 90 Degree Swivel Hose Ends

2 x AN-4 180 Degree Swivel Hose Ends

2 x AN-4 Hose Separators

How to Cut:

For cutting your new steel braided hose to length you will need:

Cutting wheel/ hack saw/ or steel braided hose cutters

Duct tape or electrical tape (work best)

1.Wrap electrical tape over the area to cut to ensure a nice clean cut and prevent the braid from unravelling.

2.Clean cut the hose and clean away debris.

3.Clamp the fitting socket into the vise and insert hose into socket

4.Apply lube to nipple

5.Start hand threading the socket down onto the fitting. Be careful not to strip the threads when starting. Tighten the initial threads by hand being careful not to strip the threads when starting.

6.Once the hose goes over nipple tighten using adjustable wrench.

Note:

All items are Brand New unless stated otherwise on the listing.

We sell DIY (Do It Yourself) Items with a few exceptions.

We take no responsibility in teaching you how to install.

Professional installation is strongly recommended.