AdblueOBD2 Scanner For Renaul-t/for IVEC-O 8 Kinds Trucks Adblue Emulator NOX VIA OBD OBD2 Diagnosis Interface Trucks 1.AdBlueOBD2 For B-ENZ2.AdBlueOBD2 For FD Cargo3.AdBlueOBD2 For IV-ECO4. AdBlueOBD2 For RE-NAULT5. AdBlueOBD2 For V-OLVO6. AdBlueOBD2 For D-AF7. AdBlueOBD2 For M-AN8. AdBlueOBD2 For S-CANIAPlease kindly choose the one u need when u place order .Descrption:AdblueOBD2 is a Plug & Drive Ready device to emulate working adBlue systems and NOx sensors on trucks, which equipped with EURO 4/5/6 catalytic converter systems, even with damaged adBlue SCR system. Adblue/DEF (Diesel Exhaust Fluid) is used to reduce NOx emissions in vehicles. We recommend you to use Adblue/DEF fuel. You can use this device, if you are unable to find a station to fuel up your adBlue/DEF tank.Top 5 Reasons to Get AdblueOBD2 Emulator:1. ADBlueOBD2 is very easy to install. Just Plug it into OBD2 connector of truck or bus and remove the fuses mentioned.2. ADBlueOBD2 will override ADBlue system instantly, it will stop the usage of adBlue liquid and disable Nox sensors.3. Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.4. ADBlueOBD2 does not damage the engine and not cause any negative effects to the truck factory setting.5. ADBlueOBD2 does not change any of the settings permanently. To turn back to the truck's original settings, just unplug adBlueOBD2 from OBD2 connector.Installation and Calibration:1. Pull the Key out from the ignition.2. Remove the following Fuses Terminal - 15 Terminal - 303. Plug adBlueOBD2 into OBD2 connector4.Turn on the ignition and check the level of adBlue, if it shows 50% or 70%.5. If any fault light appears on dashboard, delete via service scanner.Certificates : CE/RoHSPackage List:1 x AdblueOBD2 Emulator Box Interface1 x User Manuel
eBike Accessories
Motorcycle Parts