Color	For Ben-z For DA-F for f-or-d For IVE-CO For Man for scanai for vo-vlo
For Ben-z For DA-F for f-or-d For IVE-CO For Man for scanai for vo-vlo

Description
Customer Reviews(0)

Item specifics

Brand Name VSTM
External Testing Certification ce
Origin CN(Origin)
Model Name new
Electronic No
Hardware Version new
Item Height 1inch
Item Length 1inch
Power w
Material Type plastic
Item Type Air Bag Scan Tools & Simulators
Item Weight 0.1kg
Software Version new
Voltage v
Item Width 1inch
color as picture

Product Description

AdblueOBD2 Emulator for 8 Brand Trucks Plug and Drive Ready Device by OBD2

AdBlue OBD2 have 8models,here is the list:

1.AdBlueOBD2 For BE*NZ

2.AdBlueOBD2 For FOR

3.AdBlueOBD2 For IVE*CO

4. AdBlueOBD2 For RE*NAULT

5. AdBlueOBD2 For VO*LVO

6. AdBlueOBD2 For D*AF

7. AdBlueOBD2 For MAN

8. AdBlueOBD2 For SCA*NIA
Please kindly choose the right one u need when place order .

Descrption:

AdblueOBD2 is a Plug & Drive Ready device to emulate working adBlue systems and NOx sensors on trucks, which equipped with EURO 4/5 catalytic converter systems, even with damaged adBlue SCR system.
Note: if you looking for Adblue for Euro 6,only this one can work:

Adblue/DEF (Diesel Exhaust Fluid) is used to reduce NOx emissions in vehicles. We recommend you to use Adblue/DEF fuel. You can use this device, if you are unable to find a station to fuel up your adBlue/DEF tank.

Top 5 Reasons to Get AdblueOBD2 Emulator:

1. ADBlueOBD2 is very easy to install. Just Plug it into OBD2 connector of truck or bus and remove the fuses mentioned.

2. ADBlueOBD2 will override ADBlue system instantly, it will stop the usage of adBlue liquid and disable Nox sensors.

3. Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.

4. ADBlueOBD2 does not damage the engine and not cause any negative effects to the truck factory setting.

5. ADBlueOBD2 does not change any of the settings permanently. To turn back to the truck's original settings, just unplug adBlueOBD2 from OBD2 connector.

Installation and Calibration:

1. Pull the Key out from the ignition.

2. Remove the following Fuses Terminal - 15 Terminal - 30

3. Plug adBlueOBD2 into OBD2 connector

4.Turn on the ignition and check the level of adBlue, if it shows 50% or 70%.

5. If any fault light appears on dashboard, delete via service scanner.

Certificates : CE/RoHS

Package List:
1 x AdblueOBD2 Emulator Box Interface