Description:

Microprocessor Control (CPU). 

1. SMART AUTOMATIC CHARGING:

2. This is a fully automatic battery charger.

3. Automatic charging protects your battery from being overcharged. So you can leave the charger connected to the battery indefinitely.

4. chargers are suitable for most battery types including Calcium, Gel and AGM, Wet batteries. They may also help restore drained and sulphated batteries.

5. Types of batteries: Most types of lead acid batteries including Calcium, GEL and AGM, Wet,EFB, etc..

Feature:

Touch switch mode technology: Yes

Polarity protection: Yes

Output short protection: Yes

Non battery link protection: Yes

Over temperature protection: Yes

Short circuit protection: Yes

Overcurrent protection: Yes

Overheat protection: Yes

Fire protection: Yes

Low voltage protection: Yes

Over voltage protection: Yes

Reverse protection: Yes

Electric shock protection: Yes

Cooling:  Fan

Color: Yellow

Specification:

Input voltage: 110-265V AC, 50-60Hz

Rated output: 12V/8A  , 24V/4A

Minimum start voltage: 8.0V

Battery range: 2-150Ah

Power: 140W

Multiple modes: Car / motorcycle / AGM / GEL / lead acid

Mode: Summer/winter

Display: Voltage, current, temperature, repair, completion, reverse

Thermal protect: 65'C+/-5'C

Compliant standards: CE, FC, Rohs, PSE

Dimension (L×W×H): 162×100×55mm 

Note:

This Charger is for battery capacity between 2AH to 150AH

Pls check the capacity (AH) of your battery before buying the charger! Thanks!

Package Included:

1 X 12/24V Pulse Repair LCD Charger

The microcomputer automatically recognizes the ambient and gives you the appropriate charging voltage for the battery according to the season.

Above 28 °C

Will Automatically Enter Summer Mode

Below 10 °C

It Will Automatically Enter Winter Mode

Note: The Temperature Will Be Automatically Detected

The use of national standard copper wire can ensure a stable current output long time charging, wire no heating long service life.

FULLY WRAPPED HIGH GUIDE CLIP

12V Battery Charging Display

STEP 1

The Red Clamp Holds The Positive Pole

The Black Clamp Holds The Negative Pole

STEP 2

Plug In 220V Power Sourc

And Start Charging