Application

for VW 1.9 TDI PD130 PD150

for VW 2.0 TDI PD140 / PD170 ASZ BKD

Fitment details: 

for Audi A3 / S3 / RS3 8L1（MK1） 1996 - 2003 Hatchback 1.9 TDI 

for AUDI A4 (8E,B6) 2000-2004 - 2.0/1.9 TDI

for AUDI A6 (4B,C5) 1997-2005 - 1.9 TDI

for AUDI A6 (4F) 2004-2011 - 2.0 TDI

for Seat Leon 1M1 1999 - 2006 Hatchback 1.9 TDI

for SEAT Toledo (1M) 1999-2005 - 1.9 TDI

for SKODA Octavia (1U2) 1996-2010 - 1.9 TDI

for SKODA Superb (3U4) 2002-2008 - 1.9/2.0 TDI

for Skoda Fabia I 6Y2 1999 - 2008 Hatchback 1.9 TDI

for VOLKSWAGEN Bora (1J2) 1998-2005 - 1.9 TDI

for VW Golf MK IV 1997 - 2006 1.9/2.0 TDI

for VW Golf MK III 1991- 1999 1.9/2.0 TDI 

for VW Golf Cabriolet MK III 1993 - 2002 Convertible 1.9/2.0 TDI

for VW Passat B5 GP (3BG) 2001-2005 1.9L/2.0 TDI 

for VW Polo 9N_ 2001- 2009 Hatchback 1.9 TDI

(Note: Please confirm the dimensions before purchase the connecting Rods)

Specification

*Type: Forged 4340 aircraft chrome moly quality steel for racing

*H-beam Conrods Quantity: 4 Pieces as showing in picture

*Bolts: Including Genuine ARP 2000 5/16" bolts  (Note: Extra cost for upgrading to ARP L19 bolts)

*The connecting rods all include ARP 2000 bolts, which are rated at 220,000 psi, and the optional ARP L19 material at 260,000 psi is available as an upgraded product.

*Advertised Horsepower Rating:200HP/piece

*Top acceleration: 9000rpm

*package size：28CM*21CM*10CM

Dimensions

Center to center length: 144mm/5.669in

Big end diameter: 53.7mm/2.114in

Small end diameter: 26mm/1.024in （taper small end）

Big end width: 24.95mm/0.982in

Small end width: 24.95mm/0.982in

Feature:

The density of titanium is significantly lower than that of steel, while maintaining considerable strength, which means that it is lighter than steel, but the strength is very similar.

1. Titanizing can further improve the bending strength of the product;

2. Titanizing will not affect the weight of the connecting rod;

3. Provide a wear-resistant layer, which greatly prolongs the service life of the parts;

4. TüV Certification Con Rods.

5. Material: Forged SAE 4340 Chrome Moly Steel for the highest strength and durability, dedicated for Racing.

6. Genuine ARP 2000 bolts ,Optional ARP L19 fasteners available as an upgrade.

7. H-Beam design reduces weight without compromising strength.

8.Heat-treating & Shot-peened for remained consistent and strong, Shot-peened finish to remove potential for stress risers.

9.100% CNC machined,Precision rod cap alignment dowels.

10.Bores finished to +/- .01 mm.

11.Balanced to within +/- 1 g per rod.

12. Each rod is magnetic particle tested to ensure free of flaws.

13.100% X-rayed, sonic tested.

14.Custom Service.

Note:

*Professional installation is highly recommended ；

*Custom Service:If there's no conrods you need on our site, we would be happy to help determine your requirements and develop a solution with you to satisfy your needs.