Sound Level: 120-150dB

Power: 400W

Voltage: 12V

Material Type: ABS + Metal

Item Type: Siren Horns

Features:
- Easy to install anywhere with 12V DC power.
- Siren: 400 watt amplifier.
- You can connect flash lights.
- It has microphone functions.
- The sound is loud and so pure.
- Wireless push to talk microphone.
- Universal for all kinds of cars and vehicles.
- 18 Tone Hands-Free operation with override from the horn ring.
- A microphone is attached to the remote control,press the button on the left of the remote control and point your mouth to the upper left corner of the microphone.
- Low energy consumption, long life and reliable performance, easy to operate.

Speaker Features:
- The speakers are individually packaged.
- A Neo driver which is known to deliver a robust low frequency sound.
- Weather-proof housing case.
- Clear sound frequency.
- Built-In bracket for mounting.
- Non-corrosive finish.
- Universal to all Sirens.

Remote Control Siren Amplifier:

Input Voltage: 10~16V DC

Input Current: [email protected] DC

Output Power: 400W(Max)

Standby Current: Less then 150mA

Operating Temperature : -40℃ ~55℃

Humidity Less then : 95%

Siren Frequency : 420Hz ~ 1770Hz

Light Line Current : 10A + 10A

Impedance : 6.0 Ω

Fuses ：15A

Professional Installation Recommended:
- If you are installing this on your cigarette plug in your vehicle, you may need to increase the fuse on your cigarette outlet.
- Easy to install anywhere with 12V Power.
- No installation guide provided, please consult with car audio installer or mechanic.
- Custom installation required. Requires 12V Power delivered to 2 wires.
- You may have to extend the wire between the speaker and the control module if you are mounting this in your engine bay.

Wiring Guidance: There are two groups of harnesses on this one. There is a harness with four red, black, green and green wires. Plug this harness into the side of the main engine, then connect the red wire to the positive pole of the 12V battery, the black wire to the negative pole of the 12V battery, and connect the two green wires with the two wires of the power amplifier horn, After connecting, turn on the side switch of the main engine, and then turn on the remote control to control it.

Place of Application: SUV, Bus, Off-road, ATV, Wagon, UTB, Forklift, Truck, Motorcycle, Motorbike, Bike, Car, Van, Truck, Pickup

Note:
No installation guide provided, please consult with car audio installer or mechanic.
Custom installation required. Requires 12V Power delivered to 2 wires.
You may have to extend the wire between the speaker and the control module if you are mounting this in your engine bay.
All automobiles and devices equipped with a 12V power source.
Non-adjustable volume.

Product Weight: 3040 G / 107.23 Ounces

Product Dimensions (L*W*H): 255*195*225 MM / 10.04*7.68*8.86 Inches

Package Weight: 3000.0 G / 105.82 Ounces

Package Dimensions (L*W*H): 255*195*225 MM / 10.04*7.68*8.86 Inches

Retail Packaging: Yes, General Box

1 x Speaker Unit

1 x Control Box Set

1 x Remote Controller

1 x USB Charging Line

1 x Light Control Line

1 x Horn Power Cord

1 x Cigarette Lighter Plug

1 x Spare Fuses