2022 Latest Digiprog3 OBD2 Version Digiprog 3 Full set OBD programmer A Quality DigiprogIII FTDI Digiprog III V4.94 OBD Cables

DIGI3 Operation test video:

Attached video is a comparison of our correct operation and incorrect operation. You can see that if you click lightly and randomly, the button will not be available. If you follow our instructions, use a little pressure or click with a pen, the buttons will work normally.

Please Note :

1.It can not connect to the computer when you use it.

Otherwise it would have the Blue-Screen problem.

2.This Link has Four Version :

①OBD Normal Chip Version and ②OBD FTDI Chip Version

③Full set Normal Chip Version and ④Full set FTDI Chip Version

*For OBD Version, Only main unit with the ST01&ST04 cables

*You can choose the plug version as you need

3. FTDI Chips is FT232BL&93C46 Chip.(FTDI version is more qualified.)

4.Digiprog 3 we sell is not original, and it is made in China, so please do not update online by yourself.We already update it to the newest version before send it out.

5.The password is "1" . After you type "1" and then choose mark " √ ". Then you could work with it at once!(click tick" √"not " X", otherwise Digiprog3 will freeze.)

6.The product does not contain computer software, we only provide 3 reference files: Wire Color Changed List, Adapter Cable Manual, Supports List

7.Latest software Version: V4.94

Supported Multi-Languages:

Deutsch, English, Espanol, French, Portuguese, Italiano,Turkish, Nederlands.

New&Original CPU Display:

Function：

engine control units, operating hours counter, keys, memory error, motorcycles, etc.DIGIPROG III Machine with full software Include.Intelligent accessories and extensive manuals are enclosed.

Other features:

Service interval adjustments and settings

Assyst processing

Fault memory read-erase

EEPROM programmer

Integrated PC communication

Digiprog 3 How to use ？

1.Turn off your engine and locate the "Function" button on the front of DigiProg III

2.Press and hold the "Function" button while turning the engine on.

3.Press the "Function" button repeatedly to scroll through the options until you come to "Auto."

4.Press and hold the switch until "-" is displayed. Release the switch when this appears. "Unit" will now appear on the display.

5.Wait until "Cal" appears on the display followed by zeroes, then drive your automobile until one mile clicks over on DigiProg III .

6.Stop the car and then press and release the "Function" button.

Important Tips for Using Digiprog 3:

1. DO connect the Eeprom to the ST01 or ST04 before you connect to Digiprog3, which will avoid Electro static feedback (ESD).

2. Never solder the connections whilst the lead is connected to the programmer, which will damage DigiProg3.

3. DO keep your DigiProg3 in its case when not in Use & keep it in a dry environment at night (don’t leave it in the trunk of your car) If you are using solvents to remove lacquers’ from Eeprom’s ensure that they are cleaned completely, as the solvent will damage the clips.

Full Set Version :

OBD Version :